The standard 3015 fiber laser cutting machine:
Laser cutting machine using fiber laser generator as light source.
The fiber laser used is a new type of fiber laser developed in the
world, which outputs a high energy density laser beam and
concentrates on the surface of the workpiece, so that the area on
the workpiece which is irradiated by the ultra-fine focal spot
melts and gasifies instantaneously. The automatic cutting is
realized by moving the spot irradiation position through the
numerical control mechanical system, with high speed and precision.
It can be used not only for plane cutting, but also for bevel
cutting, and the edge is neat and smooth. It is suitable for
high-precision cutting and processing of metal plates. Compared
with ordinary CO2 laser cutting machine, it saves more space and
gas consumption, and has high photoelectric conversion rate. It is
a new product of energy conservation and environmental protection,
and also one of the leading technical products in the world.
The electric-optical conversion efficiency of fiber laser is high,
and the conversion efficiency is more than 30%. The low-power fiber
laser does not need to be equipped with a water chiller. Using air
cooling can greatly save the power consumption at work, save the
operation cost, and achieve the highest production efficiency.
When the laser is running, it only needs electric energy, does not
need to produce extra gas of laser, and has the lowest cost of
operation and maintenance.
The fiber laser adopts the semiconductor modular and redundant
design. There is no optical lens in the resonant cavity, and it
does not need the start-up time. It has the advantages of no
adjustment, no maintenance and high stability, and reduces the cost
of accessories and maintenance time, which is incomparable to the
The output wavelength of the fiber laser is 1.064 m, which is 1 /
10 of the wavelength of CO2. The output beam has good quality and
high power density, which is very conducive to the absorption of
metal materials. It has excellent cutting and welding ability, so
that the processing cost is the lowest.
It is transmitted by optical fiber and does not need complex
optical guiding system such as reflector. The optical path is
simple, the structure is stable and the external optical path is
- 2.Whole machine smooth path
Protective lens: the cutting head contains protective lens, so that
the consumption of expensive consumables such as focusing lens is
Automatic adjustment: without manual focusing, the software can
automatically adjust the focusing lens and control the height of
the upper and lower parts, so as to realize the automatic
perforation and cutting of plates with different thickness. The
software can memorize the focal length of different plates, which
is easier to operate, 10 times of the manual speed.
The adjustment range is large: + 10 ~ - 10, and the accuracy is
0.01mm, which is suitable for different types of plates of 0 ~
Long life: collimating lens focus lens double water cooling, reduce
cutting head temperature, improve cutting head life;
Space: small size, light weight, movable working position, small
The laser cutting machine adopts Japan Yaskawa motor, Taiwan
Shangyin rack and Kefeng reducer. The positioning accuracy of the
machine is 0.02mm, the cutting acceleration is 1.0g, and the
working life is more than 10 years.
- 4.Transmission and accuracy
- 5.Independent control cabinet
Dust proof design: all electrical components and lasers are built
in independent control cabinet to improve the service life of