Home Products Pre Printing Equipment Other Equipment BLS600
Automatic Rigid Box Making Line
BLS600 Automatic Rigid Box Making Line
With reasonable design and reliable performance, BLS600 automatic
rigid box making line is an optimum choice for making first-rate
rigid box. It consists of the following parts including feeder,
quad stayer, gluer, spotter, and wrapper. By adopting advanced PLC
system, photoelectric detecting system, precise hydraulic pneumatic
deviation correcting system, convenient touch screen HMI (human
machine interface with Chinese and English version) and systems and
devices alike, this rigid box making line achieves high-speed
production in the continuous operations below: automatic delivery
of sheet wrap paper and cardboard, sticking of the four corners
onto the cardboard, paper gluing, suction belt conveying, and
positioning plying-up, planish, automatic collecting, wrapping and
forming of cardboard box. Through the on-line operation of
machinery, hydraulic, pneumatic and electric system, the cardboard
box production becomes fully automatic, the traditional cardboard
box producing method being innovated, and the efficiency
multiplying by more than 30 times. Production produced by this
rigid box making line can be used to make top-grade boxes for
shoes, shirts, ornaments, gifts, and etc.
Features:Constituent PartsOperation Procedure
1. Feeder installed on this rig box making machine makes possible
the automatic delivery for wrap paper.
2. Hot-melting glue system circulates automatically, stirring the
glue and gluing wrap paper.
3. Hot-melting glue tape automatically conveys and cuts itself, and
finishes the pasting of the four corners onto cardboard at one
4. Quad stayer of this rigid box making line folds the cardboard
and sticks holt-melting glue tape onto the erecting inner cardboard
automatically and conveys it to corresponding place.
5. The vacuum suction system under the conveyer belt keeps the
glued wrap paper from deviation.
6. The hydraulic pneumatic spotter device combined with precise
photoelectric detecting system is installed on this rigid box
making machine to position the glued wrap paper and fit it closely.
7. The molding section takes in cardboard box all by itself when
there is one on the conveyer belt.
8. The square press tooling planishes the box that is passing under
it, rendering the contact between wrap paper and cardboard neat and
9. The smart mechanical arm on this rigid box making line
automatically draws boxes from the conveyer belt and delivers them
to the molding section.
10. The molding section continually turns in edge sides of paper
and wraps the inner cardboard box and finishes box forming process.
11. The machine adopts PLC control, photoelectric tracking system,
touch screen HMI and realizes the automatic production of rigid
12. This rigid box making line automatically diagnoses problems and
alarms them accordingly.
W+2H-4T= C (Max.)L+2H-4T=D (Max.)
A (Min.)W+2H+2T+2RA (Max.)B (Min.) L+2H+2T+2RB (Max.)
Parameter Table of BLS600 Automatic Rigid Box Making Line
|Turn in Depth||Rmin||7mm|
|Position Precision||± 0.5mm|
|Glue Tank Capacity||60L|
1. The maximum and the minimum size of the boxes are affected by
the size and quality of raw mat