Specification of Intelligent LED Aquarium Light
1, Power: 192W, 264W Available
2, Size ( mm): 900x330x60mm , 1100x330x60mm
Size ( inch): 35.5’’x13’’x2.4’’ , 43.5’’x 13’’x2.4’’
3, Input voltage: 100~240VAC 50~60Hz work voltage: 12V or 24V
4, Infrared control distance: 0.5m~10m
5, Max Temperature of light: 65° C
6, Work Temperature of fan: 55° C
7, Epistar, Bridgelux , Cree brand 3W LED bulb Available White10000k /White 14000k / white 18000k/ blue 460nm /moon
blue453nm/ purple427nm Color Ratio Customized
8, Optional 30,45,60,90 degree view angle
Advantage Features of Intelligent LED Aquarium Light
1. Three control ways: First is remote controller, Second is attached button on panel
housing side, Third is power supply rotary knob to adjust total
light brightness. The LED screen ensures clear observation of the controller and
the convenience of manual control. Time set system can be accurate
to the very minute.
Please check the followed pictures on different Control Ways
2. Import high-performance chips, ensure the luminous effects. The
main light device uses high-power LED chips. No heat radiation,
Hardly any UV comes from LED’s. No hurt on Coral and more suitable
3. Low energy consumption, more power efficiency. LED has the
feature of high brightness and low energy consumption, so under the
same brightness, using LED, power is only half of the traditional
lamp. Besides, LED can emit light from some direction, completely
different from the traditional lights, emitting from all
4. Intelligent and passive cooling systems ensure the service life.
The light is built in temperature sensors inside, which ensure the
service life span. The fans start to dissipate heat when temperature of the LEDs
reaches 60° C. On the contrary, the fans stop working in lower than
60° C. Few of the lights are turn off at night, the fan is unnecessary
and fan noise can be avoided.
5. The light can operate automatically as predefined system. They
can completely imitate the change of light in nature: The white
lights turn gradually bright at dawn and turn gradually dark at
dusk when the blue lights turn bright and only moonlight blue is
left at midnight. The LEDs can even imitate the lunar cycle, which
ensures better growth of your pets in this mimic nature light. Moreover, it can work normally
even when you take a long time leave.It can simulate normal and four season(spring, summer, autumn and winter) in five mode.
6. Color temperature can be custom-made, which can be used for both
sea and fresh water. The color temperature for seawater is around
15000K~18000k and for fresh water is around 9000K~12000K. Our LED
lamps' color temperature can be used both in sea water and fresh
water. Other color temperature of lamps can be ordered. Blue-ray is
a particular wavelength of 453nm moon blue light, suitable for the
vast majority of the growth of marine organisms.
7. There are two kinds of installation mode supporting the main
light body: hanging type, horizontal bracket-style. The light can be suspended from ceiling through hanging wire
line. The light can be also supported on aquarium
through retractable outrigger.
8, There are 255 degrees in brightness in each light of different
color to be chosen. Lights of different color are turned on in groups, so that
efficacy is controlled flexibly.
9. Power supply is one of the most important parts in LED
lights and it directly influence the quality. Our Power Electronics
Solutions reach advanced levels in the world. The PF (Power factor)
is more than 0.96. External electrical power supply is stable and
quick in react when monitored. LEDs are powered by low tension to
make a safe use and to have longer lifespan. Power supplies comply
with UL, CE, CCC certification.
10. New housing patent model with aluminium alloy replace of old steel housing. It becomes
lighter in weight and more easily in heat dissipation.