Fireproof Ceiling And Wall Grooved Pet Wooden Composite Acoustic
Panel For Auditorium Hall PET MDF Wood Slat
Our Wooden Slats Acoustic Panel can be used for creating beautiful
slat walls and ceilings which adds a modern look to the room. The
panel is sound dampening and removes reverberation within the room,
which drastically improves the acoustics within the room.
* Available in 2400mm to 3000mm Lengths
* 600mm Wide
* 21mm Deep
* Each slat is 27mm wide and 12mm deep
* There are 15 slats on each panel
* The PET felt backing is 9mm deep
* MDF core with Veneered Oak Face
* Panel weight is 10kg
The base of the product is made of 9 mm thick black or gray
polyester material, which is obtained from a plastic recycling
process. The material meets the requirements of global recycling
standards, does not contain substances that are harmful to health,
and meets EN13501 fire resistance class B-s1, d0.
Suzhou Runsheng Architectural & Decorative Material Co., Ltd is
founded in 2014 which is a professional manufacturer of PET
Acoustic panels. We offers everything you need for Noise Control,
Soundproofing and Acoustical Products for Commercial,Industrial,
Educational, House of Worship, Pro Audio, OEM, Home Theater and
other Residential applications. All of our sound absorbing products
have independent sound and flammability tests and most products
offered are ASTM E84 tested Class A.
Q: Does the panel have a larger size? The acoustic range panel has
only one size, 2400 mm x 600 mm.
However, we design them to seamlessly connect horizontal and
vertical, so that any length or width can be easily achieved.
Q: Can the panel be used in the bathroom or kitchen?
Yes, but be careful that the panel is not in direct contact with
Q: Can I install sound-absorbing panels around sockets, windows,
Yes, there is no problem adjusting the panel to fit any
pre-existing accessories. You can cut the panel horizontally and
cut the acoustic felt longitudinally with a sharp blade. You can
then place them around any objects
on your surface.
Q: Is it possible to maintain the consistency of the wood finish of
the entire panel?
Our wood always comes from the same supplier, so the finish will
not have a big color difference. However, as natural wood, knots,
slight cracks and color changes may occur.
Q: What can be installed behind the sound-absorbing panel to
increase the sound insulation effect?
In order to get the best sound-absorbing effect, we strongly
recommend that you install sound-absorbing wood panels with batons.
However, if you want them to be used only for decorative purposes
while still providing some sound absorption, we recommend that you
use black or gray screws to screw the panel directly into the wall
through the acoustic felt backing.
Q: Can the sound-absorbing board series be used outdoors?
The wooden slat acoustic series is specially designed for indoor
Q: On which surfaces can the sound-absorbing panel be installed?
The sound-absorbing board series can be easily installed on any
surface, including brick walls, concrete walls and gypsum board