Sign In | Join Free | My futurenowinc.com
futurenowinc.com
Products
Search by Category
Home > Plastic Products >

High Temperature PTFE Non Stick Coating , Water Based Coating

Categories Application Box
Brand Name: TechYours
Model Number: 16700
Certification: RoHS,SGS,FDA
Place of Origin: China
MOQ: 500kg
Packaging Details: 30kg in drum
Raw Material: PTFE
Type: Water Base
Color: Customerize
Brand name: Techyours
Application Method: Spray
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    High Temperature PTFE Non Stick Coating , Water Based Coating

    PTFE Non Stick Coating / Three-Layer Spray / Water Base Non-Stick Coatings


    Appearance: Black liquid (Primer and top)

    Solid content (%): 35±1

    Viscosity (cp): 600~1000 Primer

    400~800 Top

    Density (g/ml): 1.20 Primer/1.30 Top

    pH: 8-11 (Primer and top)

    Color of the film surface: Black with metallic (Flat and smooth)

    Curing temperature (℃): 380-420

    Gloss (60° glossimeter): 10-20

    Film thickness (μm): 20-30

    Non-stick performance: >10 cycles (Fry eggs at 170±10℃)

    Corrosion resistance: No blister (Boling 10% salt water for 24 hours)

    Abrasion resistance 3KG/21cm2: >3000 cycles

    Hardness (ZHONGHUA pencil): >H


    Brief Introduction


    Techyours® is designed with two-layer coating system. Thanks to its high density, good inadhesion, easy-to-clean performance and strong practicability. It is applicable for substrates like aluminum, alloy and stainless steel etc.



    Type of PTFE Coating



    Water Base



    Main Features of PTFE Coating



    l Eco-friendly

    l Excellent heat resistant

    l Excellent chemical resistance and abrasive resistance

    l Excellent and lasting non-stick performance, easy to clean



    Data List of Techyour PTFE Coating



    ITEM16700
    AppearanceBlack liquid
    Solid content (%)35±1
    Viscosity (cp)

    600~1000 Primer

    400~800 Top

    Density (g/ml)1.20 Primer/1.30 Top
    pH8-11(Primer and top)
    Color of the film surface8-11(Primer and top)
    Curing temperature ()380-420
    Gloss (60° glossimeter)10-20
    Film thickness (μm)20-30

    Non-stick performance Fry eggs at 170±10

    >10 cycles

    Corrosion resistance Boling 10% salt water for 24 hours

    No blister
    Abrasion resistance 3KG/21cm2>3000 cycles
    Hardness (ZHONGHUA pencil)>H


    Main Processing Way of Techyour PTFE Coating



    1. Requirement on pre-treatment

    l Firstly, apply high-temperature degreasing, then wash with 1%~3% NaOH solution (60) for more than 6 minutes, dry it after water rinsing;

    l Blast with 80#~120# corundum to make the surface roughness reach 2.0μ~3.0μ, pay attention to sandblast evenly;

    l Wash with 1%~3% NaOH solution(60) for more than 6 minutes, rinse with water;

    l Wash with 1%~3% hydrochloric acid solution (60) for more than 6 minutes, rinse with water and dry.


    2. Preparation of the coating

    l Dispersion of coating: the coating must be fully dispersed before operation;

    l Viscosity adjustment: the viscosity could be adjusted according to different spray methods. Dilute with clean water if the viscosity is over high;

    l Coating filtration: filtrate the coating with screen (100mesh) before using.

    3. Application

    l The spraying environment should be dry, well-ventilated, no smoking and fire. We suggest using dedicated spray gun, elevated tank and curing oven;

    l The air compressor should be degreased, dewatered and equipped with water oil separator before using;

    l Roll the coating at 30rpm speed before using to make sure there is no sediment, and filter with 100 mesh screen;

    l Adjust atomization and oil pump capacity of the spraying gun; make sure the unit is clean and flat;

    l Preheat the substrate to 35 and spray the primer. Dry it at temperature of 120~150 for 10min-15min. Keep the thickness of primer within 12μm-18μm;

    l Spray top coating after the primer is dry and cooling to room temperature, then spray the top. Dry the unit at the temperature of 100~150 for 10~20 min, and gradually increase the temperature to 380~420. Keep for 10 min. Keep the thickness of top coat within 10μm~12μm. The thickness of two coat tally should be between 20μm~30μm;

    l The oven (or the tunnel drier) must be well ventilated; otherwise, it will lead to color change of coating.



    Main Application of Techyour PTFE Coating



    l Ecofriendly PTFE emulsion

    l Non-stick and excellent abrasion resistant

    l Excellent weatherable, salty foggy resistant

    l Excellent strong acid resistant and alkali resistant

    l Applied to iron, aluminum, ceramic, stainless steel cookware etc.


    Package&Delivery



    Techyours® PTFE non-stock coating must be stored under frost proof environment under optimum 18-26℃ temperature;

    It should be homogenized once or twice a month by gentle rolling or stirring when storing or before using,90min per time.


    Techyours® PTFE non-stock coating is package in 25L PE drum with 25kg(55lb) content.


    Before processing, please read the Materials Safety Data Sheet carefully. You could find them from www.everflon.com, or contact us +86-27-84888055 or our local service center, you also should could scan the QR code which on the package to download by your Smartphone.

    Quality High Temperature PTFE Non Stick Coating , Water Based  Coating for sale
    Send your message to this supplier
     
    *From:
    *To: Hubei EverFLON Polymer Co.,Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0