Categories | Plastic Testing Machine |
---|---|
Brand Name: | DahoMeter |
Model Number: | DH-MI-VP |
Place of Origin: | Dongguan China |
MOQ: | one set |
Price: | USD999 to USD1999 |
Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability: | 300 sets per month |
Delivery Time: | 3 days |
Packaging Details: | standard exporting wooden package |
Measuring Principle: | Acoustics |
HS Code: | 9032100000 |
Temperature uniformity: | ±0.5℃ |
Testing before delivery: | Yes |
After-sale customer service: | Yes |
Product name: | melt flow indexer tester |
Digital ISO 1133 Polythene Melt Flow Index Tester
Product introduction
The melt flow rate instrument is also called the melt index
instrument for the determination of the melt flow rate MFR value of
various plastic and resin in the viscous flow state.
It is applicable to engineering plastics such as polycarbonate,
polysulfone, fluoroplastics, nylon and other engineering plastics
with high melting temperature.
It also applies to polyethylene (PE), polystyrene (PS),
polypropylene (PP) and ABS resin. Polyvinyl formaldehyde (POM),
polycarbonate (PC) resins and other low melting temperature plastic
tests.
Main uses
The melt flow rate meter is used to determine the melt mass flow rate (MFR), melt volume flow rate (MVR) and melt density of the thermoplastic resin.
It is not only applicable to polycarbonate, nylon, fluoroplastics,
polysulfone and other engineering plastics with high melting
temperature, but also for polyethylene, polystyrene,
polypropylene,ABS tree. The test of low melting temperature, such
as fat and polyformaldehyde resin, is widely used in plastic
materials, products, petrochemical and other industries as well as
related universities, scientific research units and commodity
inspection departments.
Working principle
The melt flow rate meter refers to the quality or volume of the thermoplastic that passes through the standard die every 10 minutes at a certain temperature and load. This instrument can only be used for the determination of melt flow rate (MFR) in mass method, and its numerical value can characterize the viscous flow characteristics of thermoplastics in molten state.
Machine size(W*H*D) | 250*510*350mm |
Power | AC220V±10% 50Hz |
Barrel parameters | Inner hole 9.55±0.025mm |
Pistons parameters | Piston head: 9.475±0.015mm |
Piston length | H=6.35±0.1mm |
Paramters | Extrusion hole 1=2.095±0.005mm |
Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
Temperature rangeradius | 400degree centigrade |
Temperature accuracyblade to jawand dust collector | ±0.2 degree centigrade |
Display resolution | 0.1degree centigrade |
Maximum comsuption | < 600W |
Temperature recovery time | less than 4 min. |
Weight parameters | |
Weight accuracy | ±0.5% |
Basic configuration | 0.325kg, 1.kg, 2.1kg, 3.kg, 5.kg, 10.0kg, 12.kg, 21.6kg |
Position detection | |
Loop distance from up and down | 30mm |
Control precision | ± 0.1mm |
Test flow control | |
Times of cutting the material | 0~10 times |
Material cutting interval | 0~999s(set reference Table 2) |
Control flow reaches the set temperature without volatility | |
Barrel temperature time | 15 min. |
Material be installed | 1 min |
Material sample temperature recovery time | 4 min. |
When binder set | 1min |