YIKE Semi Auto Single Facer Corrugation Machine For 2 Ply
ZJ-F shaftless mill roll stand
- Symmetrical structure can also install two bundles of paper at the
same time,Paper can be used for non-stop for a job；Adopts
mechanical drive to complete the paper clamping, lifting, loosen,
move on, around translational motion, etc.
- Each shaftless mill roll stand is equipped with two pieces of paper
guide, two set of paper car；paper guide the use of channel 14 and
the guide post weld,paper car adopt 10mmwelded stell,the length of
track is 4500mm.
- Manual dics brake,add screw following
- Electric elements centralized control the electric elements,expand
1,Backstands action mode:mechanical electric operation
2,the range of paper jams:maximum:1600mm minimum:600mm
3,the diameter of paper jams:maximum:￠1400mm minimum:￠400mm
4,Unilateral maximum load:maximum2000Kg
5,Powered motor parameters:
①Paper jams motor550W×4set 380V 50HZ short(S2)working standard
②lift motor 1.5Kw 380V 50HZ short(S2)working standard
- Mainly purchased parts, raw materials and origin:
|Name of main parts||Brands or place of origin||Material|
|Reducer||Shandong Dezhou Jin bu huan|
|Contacts||Chint or De li xi|
|Chuck||Xusheng||3 inches, 4 inches shared|
SF-280S fingerless type single facer
- Electric heating model with 18 heating tube (If steam hearting,
ignore this item)
- Adopt vacuum suction structure, with high pressure strong blower.
Suction with silencer.
- base and wallboard cast iron wall,Wallboard
- pressure roller ¢ 284mm,surface grinding and chrome-plated；cylinder
control and remove up and down, 45 carbon steel materials,
quenching (with cushioning devices).
- pneumatic control glue to glue back, glue roller diameter
￠215mm,Engraved polished surface after a 36-line pit style textured
machined chrome plated,after scraping the roller surface polished
hard chrome plated.
- Corrugated roller, pressure roller materials provided by the
Central Plains Steel,High on corrugating unilateral 0.15mm, 0.075mm
high pressure roller unilateral. Plus stopper. ¢ 160mm cylinder
with compression cylinder.
- preheat roll adopt seamless steel pipe production by tiangang ¢
300mm,connecting with metal Hose.
- Regular technical parameters:
2,Operation direction:left or right(determined in accordance with
3,Design speed:100m/min working speed:40m/min
5,Corrugated flute:(UV type or UVV type)
- Roller diameters parameters:
1,diameter of corrugated roller: ￠280mm
2,diameter of pressure roller: ￠284mm
3,diameter of glue roller: ￠216mm
4,diameter of preheat roller: ￠320mm
- Powered motor parameters:
1,main drive motor:7.5Kw rated voltage:380V 50Hz Continuous (S1)
2,suction motor:7.5Kw rated voltage:380V 50Hz Continuous (S1)
- Main purchased parts,materials and place of origin:
|Name of main parts||Brands or place of origin||Material and type|
|Wall and Pedestals||Production own||HT200|
|Rotary joints and metal hoses||Shan dong teng zhou luguanqiu|
|Main drive motor||Hebei Hengshui||7.5Kwspeed motor|
|bearing||HRB,ZWZ,CYC or Zhengjiang wanxiang|
|Seat belt bearing||Zhengjiang five rings|
|High pressure air||Shanghai Yingfa|
|contacts||Chint or de li xi|
NC-1600 COMPUTER SHEET CUTTER MACHINE
- can save 200 sets of orders, replace the cutting specifications
quickly and accurately, non-stop for a single, and can achieve
computer networking, easy production management.
- knife shaft drive gear with eccentric shaft installation, to
achieve no backlash drive, high transmission accuracy.
- cross-cutting knife with inserts steel blade. Fixed blade blade
flat structure, more stable, more suitable for cutting high weight
and high toughness of cardboard, the shear force is small, long
- pull paper roller outsourcing non-slip material, more
wear-resistant, accurate size.
- host base and wall panels with high-grade gray cast iron, high
strength, strong anti-vibration.
- servo controller control motor drive, 5.7 inch color touch screen
display, the project at a glance.cutting length: 300mm-9000mm,
cutting accuracy: ± 1.5mm (steady speed).
- General technical parameters
- Working width:1600mm
- Mechanical speed:60m/min
- Minimum cut length:300mm
- Maximum cutting length:9000mm
- Cutting accuracy: uniform speed ±1.5mm
- Power motor and electrical parameters:
- Main drive motor power:3KW
- Full AC Synchronous Servo Control
- Papermaking motor power:3KW(Frequency)
Rotary paper receiving machine
- The machine receiving the highest speed 70m / min.
- The maximum length of the machine to receive paper 1600mm.
- The machine can achieve automatic points without stopping,
automatic stacking, automatic sub-stacker.
- The maximum stacking height of the local stacking unit is 100mm.
- The automatic stacking machine covers an area of small, and save
manpower, is the best choice for low-speed machine.