Speed drum 4200 r/min solid bowl Horizontal Decanter Centrifuge for
Introduction of Company:
Juneng Group is a large scale manufacturer of industrial products
in China with its subsidiaries namely Juneng Machinery(China) Co.,
Ltd and Jiangsu Juneng Machinery Co., Ltd.
The group principally engaged with the in-house research &
development as well as manufacturing of various industrial filters,
separators and pumps.
The Company is proud to be the leader in such industry with Fats
industry, Chemical industry, Pharmaceutical industry, Beverage
industry, Petrol - chemical industry, and now is one of the
well-know producers and suppliers in the world.
The company now has its three production bases with a total
capacity of 280,000 square meters in Nanjing City and Yixing City
of Jiangsu province, permanent workforces not less than 1300 people
and the production line is well equipped with more than 1500 units
of advanced production equipment and test instrumentation.
Decanter centrifuge is a mechanical equipment which utilize the
principle of centrifugal and sedimentation and can carry out
continual separate the suspend liquid with density difference.
The centrifuges which made by out factory can clarify, dehydrate
and classify the suspensions with 0.002-3 mm solid-phase particles
and thickness range at 0.5~40%. The product can be classify into
two type LW-counter-current and parallel-current base on its
According to feed feature, product can be divide into LW two-phase
separator, LWS three-phase separator. It is suitable for separating
different feed under different process condition, and widely use in
pharmaceutical, food, chemical, light industry, environmental
protection industry etc…
Decanter centrifuge is most often used for clarification of liquid
containing high concentrations of solid, removing solids from
liquid. It is usually used in waste water and PVC sludge industry.
And also can be used in sunflower oil, palm oil and tea industry.
Product competitive advantage:
1, Helical pusher adopts the special antifriction method: sprinkle
hardness alloy or inlay hardness alloy anti-friction disk; anti
–corrosion stainless steel is employed for the material of the main
parts of drum, so that assure the durability and longer using
lifetime of the equipment.
2, According to the operating condition’s characteristics of
material, optimize the drum length-diameter raido, drum and
structure of drum taper parts.
3, According to the material thickness, flow change , the rotate
speed difference and tolerance can be adjusted.