HXE-24VX Super fine copper wire drawing machine
I. Quick Details
Super fine copper wire drawing machine is used to drawing copper
wire from 0.14mm-0.4mm to 0.025mm-0.08mm
|1. Pay-off stand||1 set|
|2. HXE-24VX Drawing machine||1 set|
|3. Lubrication system||1 set|
|4. Spare parts|
III. Main technical parameter
|Slip ratio of machine||8%||10.5%|
|Slip ratio of fix speed capstan||5%||6%|
|Capstan||Ceramic plasma||Ceramic plasma|
|Fix speed capstan diameter(mm)||100||120|
|Frame||Welded by steel plate||Iron cast|
|Power control||Inverter control|
|Transmission type||Flat belt|
|Traversing unit||Ball screw|
strap synchronous motor
|Tension control||No Tension||Weight balance type|
|Lubrication type||Spray type|
|Applicable spooler size (mm)||220||250|
|Spooler capacity (kg)||10||30|
|Bobbin loading&unloading type||Shaft type|
The machine should be installed in the flat clean, well-ventilated
ground, shock-absorbing rubber block on the base of the machine,
placed by horizontal correction.
Use the foundation screws to fix the four sides of the machine on
the ground to ensure that the machine is in operation, no vibrate.
Electrical control box RST terminal for the external power cord,
ground wire terminal must be grounded.
5-1. Ensure that the lubrication oil temperature control in the
range of 40 -50 ℃ or lower.
5-2. Use special Silver lubrication oil to protect the wire.
VI.Through the dies
6-1. Use pliers to break the wire to get a smaller section.
6-2. Use pliers to make the wire through the dies, then pull the
wire out. Pay attention to the dies` front and back.
6-3. If wire breaks can use Cold welding machine to fix.
VII. Advantage and after-sale service
(1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take
responsibility, but if the Buyer agree, will charge fees
accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the
C. Due to Buyer`s wrong operation that may cause damage to the
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer
should inform Seller in letter form to repair in seven days, If
beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning,
typhoon, earthquake, riots, war, fire or flood) and other factors
that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts
and teach. After warranty, will charge accordingly.