Steel Plate Edge Groove Milling Machine for High Quality Welding
The milling machine can processing different forms of plate , such
as sheet metal before welding, machining straight-edge, bevel, X,
Y,U groove, etc., for welding with improved product quality and
work efficiency, reduce energy consumption, reduce labor intensity,
etc., it’s the latest groove advanced processing equipment.
This series groove milling machine is the popular and advanced
machine, which instead of the planing machine. It is widely used in
the equipment manufacturing, such as pressure , boiler,
shipbuilding, electric power, chemical and machinery industries.
sheet metal straight edge before welding, machining, bevel and U
groove, especially improved product quality for welding automatic
welding, improve efficiency, reduce consumption, reduce labor
intensity, etc., it’s the advanced processing equipment which
instead of the edge planing machine.
Milling head setted on the trolley, and in front of the milling
head installed with cross slider and angle adjusting unit. After
fixed the plate, the cross slider will adjusting the position
between milling head and plate, meanwhile it can adjusting the
angle adjusting unit, and the milling head can be adjusted in the
range of 0-45°, which can satisfy different bevel requirement. When
milling, the milling head revolving in a high speed, and milling
the plate through milling cutter. Trolley milling speed adjusting
VFD in the range of 0.1-1m/min, moving smoothly. In order to
improve the working efficiency, the trolley designed with fast
return motor, fast return speed upto 5m/min.
If you do not see anything that matches your requirements please
contact us to discuss your needs further.
The angle of milling
The thickness of being processed steel plate (mm)
The max depth of milling bevel edge at one time (mm)
Hydraulic pressure (Mpa)
The number of the cylinders
The height between the worktable and the ground (mm)
The power of driving motor (kw)
The power of milling motor (kw)
The power of oil pump motor (kw)
1. The rail of lathe bed use high quality carbon steel, welded
together with the machine after milling, and then by machining,
which with good Wear-resisting performance, and it’s hard
2. lathe bed, wall panels, and pressure beam welded by high quality
plate, using box-type structure. All welds according to
specifications welding, after welding parts need to be annealed to
eliminate the welding stress. Lathe bed rail is 45 # steel
forgings, processed high-frequency hardening, hardness HRC45 ~ 50,
removable, and the bed fixed with bolts and dowel pin for easy
3. .The normal elastic deformation of the beam on elastic 8-20mm,
cylinder release after the reset is a normal situation.
4. .The trolley of the travel box drove by one feeding motor and
fast return motor. The travel box install with reduce unit, one
extend gear matched on the rail, start the motor it can move the
trolley as milling speed. Feeding speed is variable, fast speed can
upto 1m/min,travel smooth, with high milling efficiency. The travel
also install with fast return motor, fast return speed is 5m/min,A
clutch to control work.
5. .Cross slider installed on the trolley box , power-operated
lifting, warm and wheel reducer, screw driven slide down. Manually
adjustable front and rear direction, from top to bottom and front
and rear direction of the Vice-regulation are used to guide rail.
Cross slider adjusting smooth and reliable, easy operation
6. .Angle adjusting mechanism mounted on the lifting of regulatory
agencies on a skateboard, skateboarding down with the lift. The
unit mainly by a fan-shaped worm gear and a worm component, manual
adjustment. Head connected to the fan worm gear by an transition
plate, , the angle adjusting mechanism allows Head 0-45 ° angle
with the horizontal adjustment. Meet the needs of groove.
7. Hydraulic control system install inside of the lethe bed, the
bottom half of the hydraulic control is the oil box, top half
install with hydraulic components, pump station and motor, etc.
Hydraulic oil through hight pressure hose to each oil way and