Waterproof Sandwich Structure Outdoor Wall Mounted Cabinet With
Telecom Power System And Battery
|Place of Origin: Shenzhen, China (Mainland)|
|Brand Name: ESTEL||Structure: double wall, with insulation|
|Model: ET6565115-W||Cabinet Layout: one compartment, for installing 19” equipment and
|Product Name: Outdoor Wall Mounted Cabinet||Protection Level: IP55|
|Certification: ISO9001, CE, 3C, FCC, TLC, IP65||Cabinet Lock: anti-theft three point lock|
|Application: outdoor telecom base station||Cable Entry: at cabinet bottom|
|Material: galvanized Steel||Illumination: DC48V LED lamp|
|Heat Insulation: PEF||Cabinet Door: one front door|
|Color: grey (support custom made)||Cooling: DC48V heat exchanger and DC48V fans|
|Coating: anti-corrosion outdoor powder coating||Installation: wall mounted|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 set|
|Payment Terms:||T/T, L/C etc.|
|Supply Ability:||8,000 sets per month|
|Delivery Time:||15-20 working days|
|Packaging Details:||wooden case|
The ET6565115-W Wall Mounted Outdoor Telecom Cabinet is widely used
in wireless communication base station, such as 3G system,
communication/network integrated service, access/transmission
switching station, emergency communication/transmission, etc.
|Structure||Dimension||External Dimension: W×D×H 650x650x1150mm Internal Dimension: W×D×H
|Equipment Installation Method||19” standard rack and battery shelf|
|Door||With one front door, and anti-theft three point lock for outdoor
cabinet (support padlock)|
2.Double wall with 40mm PEF heat insulation between two walls.
|Temperature Control||Cooling||800W DC48V heat exchanger and DC48V fans|
|Lightning Protection||Grade B Lightning Protection||Nominal: 60KA; Max: 100KA|
|Lighting||LED lamp||48V LED lamp|
|Temperature||Temperature||Working Temperature: -20°C ~ 55°C|
|Storage Temperature: -40°C ~ + 70°C|
|Transport Temperature: -50°C ~ +70°C|
|Humidity||Relative Humidity||5% ~ 100%|
|Pressure||Air Pressure||62kpa ~ 101kpa (similar to 0m ~ 5000m altitude)|
|Radiation Intensity||Solar Radiation Intensity||1124 × (1±5%)W/m2|
|1||Outdoor Wall Mounted Cabinet||1||Set|
(1) External Dimension:W×D×H 650x650x1150mm Internal
(2) One compartment: the upper compartment is used for installing
equipment, the lower compartment is used for installing battery
(3) With one front door and anti-theft three point lock for outdoor
cabinet (support padlock)
(4) Material: Galvanized steel; double wall, 1.5mm thick outer
plate, 0.8mm thick inner plate. There are heat insulation between
inner wall and outer wall. The insulation material is 40mm PEF.
Cooling capacity: 800W,
Power supply: DC48V,
|3||Telecom Power System||1||Set|
GPE4890B, 90A, DC48V,1U, 4800W including: Power distribution frame
30A rectifier module x 3;
Monitoring module x 1
|4||Fan||2||PC||DC48V, installed on the top, start at 35°C|
|5||Door Sensor||1||PC||Used for door open alarm|
|6||LED Sensor||1||PC||Used for controlling LED lamp on /off|
|8||Breaker||1||Set||AC input C32A 2P*1|
|9||Lead Acid Battery||4||PC||Model: SP12-26, 12V 26Ah|
The cabinet is made of hot dip galvanized steel, double walls
structure. There are heat insulation between the two walls. It is
easy for installation and with perfect sealing performance.
Equipment Compartment: The ET6565115-W cabinet is used for installing telecom equipments
and battery. The cabinet is a double-wall cabinet, with heat
insulation between the two walls. It uses 4 fans for cooling. It is
sunproof and waterproof.
Door and Door Lock: The cabinet door uses embedded structure. The door opening angle
is larger than 110° and the door limit device can limit the opening
angle. The lock is theftproof three point lock, supports padlock.
Cabinet External Size : 650x650x1150mm (W×D×H),
Cabinet Internal Size : 550x550x950mm (W×D×H)
4.1 The cabinet is dustproof, sunproof and rainproof, which is used
in outdoor environment.
4.2 The cabinet use heat exchanger and fans for cooling.
4.3 The layout of the cabinet is reasonable, which will facilitate
cable access, fixing and grounding. There’re entrance holes
individually for power cable, signal cable and optical cable.
4.4 All the cables used in the cabinet are made from flame
4.5 Perfect protection
● Integrated top cover, good seal, water proof
● Protection Grade: IP55
● High stability, anti-UV radiation
4.6 Heat Insulation
● Sandwich structure insulates the outer heat conduct, keeping
temperature inside cabinet without abrupt change,
anti-condensation, reducing heat management energy consumption.
● High performance PEF insulation material
5. Technical Specs
5.1 Applicable environment conditions:
Environment temperature: -40°C ~ + 60°C
Environment humidity (RH): ≤95% (at + 40°C)
Air pressure: 70kPa ~ 106kPa
5.2 Material: hot dip galvanized steel
5.3 Surface treatment: degreasing, derusting, rustproof phosphating
(or galvanizing), powder coated.
5.4 Cabinet load bearing: ≥600kg
5.5 Ingress protection: IP55
5.6 Flame retardance: comply with GB5169.7 test A
5.7 Insulation resistance: the insulation resistance between
grounding devices and cabinet body parts is not lower than
5.8 Withstand voltage: the withstand voltage between grounding
devices and cabinet body parts is not lower than 3000V (DC) /1min.
5.9 Mechanical strength: each surface can bear upright
pressure＞980N; after the door is open, its outer end can bear
upright pressure ＞200N.
6.1 Cable Entrance
All outside cables use bottom entrance method.
6.2 Grounding Protection
(1) The cabinet includes grounding copper bar with anti-corrosion
coating. There are enough screws for wiring connection terminals.
(2) The metal part of the cabinet should be interconnected and be
connected with grounding bar. Connection resistance between any two
points is lower than 0.1Ω.
6.3 Theft Proof Design
Door lock theft proof design
(1) Damage resistance of the theft proof lock meets GA/T 73-1994
“Mechanical Anti-theft Lock” class B requirement, supporting
(2) Three point lock
6.4 Connection and Fastening
(1)Use anti-loose threaded connection as structure and bearer
connection. Anchor bolt for fixing cabinet use?hot dip galvanized
(2)Door hinges use inner hinge mode.
6.5 Appearance and Surface Treatment
Cabinet surface coating is outdoor special powder coating, with
white gray color (PANTONE 428C). The coating complies with GB/T
6.6 LED lamp, LED lamp sensor, door sensor and fan are installed at
the top of the cabinet.
6.8 Installation Method-Wall Mounted Methods
The cabinet packing is wooden case in compliance with GB3873-83,
damp proof and shock proof. The outside of the packing is painted
with damp proof sign, shock proof sign, direction sign, etc.