CE Tank Turning Rolls Rotating Welding or Polishing Pipes, Tubes,
If a weldment is cylindrical, it is eligible to be rolled. Tank
turning rolls — powered or idler type — can rotate a pipe or vessel
to enable downhand welds. The power rolls provide steady rotation,
producing an even circumferential weld. Idler rolls are not powered
but can be added in series to support longer pipes and vessels.
Often these are used for adding flanges to pipe ends and connecting
pipes and ends to vessels.
The combination of a roller-type pipe stand and a vertical-faced
table positioner provides stability and safety when a round part is
extended outward. When the rollers provide two points of contact,
the weight is distributed evenly, and the COG can be supported.
Applied job dia
|Wheel dia. & width(mm)||Wheel linear speed(mm/min)||Motor power(kw)|
|Rubber or PU||Metal|
By stepless inverter
- Turning Capacity: 10T
- Roller Diameter : Φ300mm
- Roller width: 170 mm
- Roller surface speed range: 100-1000mm / min
- Loaded Vessel/Tank diameter range: Φ300-2800mm
- Drive unit: AC frequency conversion motor and qualified gearbox.
- Wheel center adjustment (for both drive unit and Idler unit):
Lead screw type.
- Remote control: Remote control pendent with 15mtrs long Cable
- Rotational speeds (variable speed AC drive): Step-less variable
speeds are to be adjusted from min 100mm/min to max 1000mm/min by a
potentiometer on the remote control through inverter.
- Rollers: Polyurethene (PU) lined steel rollers with thickness at
- Motor power: 2x0.55 kW
Widely Applications in:
- Petrochemicals & Chemicals industry
- Boiler Manufacturing
- Storage tank industry
- Working with welding positioner for long pipe welding
- For Welding, Polishing, Positioning, etc
Name of the machine:
pipe turning rolls, tube turning rolls, Welding roller,
conventional welding roller, bolt adjustable welding roller, pipe
welding roller, pipe turning rolls, welding rollers,self adjustable
welding roller, welding roller, welding rollers,, fit up rotator,
self-aligned welding roller, self aligned roller stand, wheel
frame, roller frame for wind tower welding, automatic adjustable
welding pipe rotator, self-aligning welding roller, sand blasting
rotator, painting rotator, 1+1 hydraulic fit up rotator, two in one
fit up station