Closed cell Flexible Thermal Foam Air Conditioning Insulation Pipe
For High And Low Temperature Resistance
Application of rubber insulating board and pipes
1. Heat resistance of shell of big tank and piping
4. Electronic appliance
5. Sports and medical equipment
6. Machinery parts
7. Sound absorbing decorations in air ducts and entertainment
8. Other industry and commercial fields
1. High and low temperature resistance
2. High Moisture and Water Vapor Diffusion Resistance
3. Low thermal conductivity, good flame and shock resistant
4. Tear resistance, oil resistance, anti-ozone and anti-aging
5. Great flexibility, harmless, nontoxic, non-radiation and high
6. Durable and easy installing
7. Closed pore foaming, good pliability
8. Beautiful appearance, easy and quick installation
The inner structure: 100% Independent Close Cell
The magnified picture shows the completely closed micro-cell
structure allows the lowest water absorption and vapor
permeability. The average diameter of the cell is only about 50μm,
that means 1 mm thickness material there arrange 20-floor cells.
Perpetual Aluminum Foil Composite Technology
The tech improves the material performance ulteriorly and prolongs
the using time. Anticorrosive layer: It protects the aluminum foil
perfectly. Aluminum foil: It has high intension and good
water/vapor isolation ability. Conglutinant layer: It can bear high
temperature, last strong binding ability long.
Low thermal Conductivity
Heat conductivity coefficient λ: it is a main physical index to
show the materials heat conductivity ability, it is relevant to the
material component, density and molecular structure. Even for the
same material, the λ will change according to the different
temperature and humidity. Especially the water absorption rate will
effect the λ seriously.
Moisture resistance coefficient μ : the bigger the μ, the stronger
the material moisture resistance ability, the using time will be
longer. For it adopted perpetual aluminum foil composite
technology, its moisture resistance coefficient is very big.
Water absorption rate: the tested result is 4%, with the composite
aluminum foil, outer water absorption rate can reach 0.
Surface Heat Exchange Coefficient
It has the special protuberant pane structure, which makes not only
the surface more rough, but also increase 20% more heat exchange
area than the other insulation material, thus the material surface
heat exchange coefficient improve from 8.1416 to 10.
Softness and intension
Because it is formed from PE and EPDM, soft properties and
intension have both improved, so the material is hard to be
damaged, and easy to be installed.
Surface Layer Intensity and Aging Resistance
It has outstanding aging resistance and acid and alkaline
resistance. With the protection of the high powerful out-sticker
aluminum foil, the service life of the insulating layer is longer.
Superior Fire Resistance and Safe, Non-toxic
Material’s burning performance complies with national standard B
grade, and the fire building performance improves with the
composite aluminum foil. There is no PVC in the material, so when
burned, it will not give out poisonous gas, such as HCN and HCL,
you can use it safely and trustingly.
Used in Many Situations
For the material is safe and nonpoisonous, and easy to install, it
is widely used in public facilities, business buildings, marketing
places, hospitals, medical, electrical and other workshops, etc.