380V 200L Silicone Rubber Kneader Machine for High Viscosity Silica Gel Mixing with PLC Control

380V 200L silicone rubber kneader is used for mixing silica gel raw materials with high viscosity

Qingdao Beishun manufacturing Silicone kneader is a piece of equipment specially used for processing silicone materials. Here is some information related to silicone kneader:

• Function: Silicone kneader is used to mix and knead silicone materials to achieve uniform mixing and proper silicone molding. It usually includes components such as mixers, heating systems, control panels, and discharging devices.
• Application: Silicone kneader is mainly used for the production of silicone products, such as silicone seals, silicone molds, silicone tubes, silicone products, etc. It has wide applications in medical, electronics, automotive, aerospace and other fields.
• Working principle: The silicone kneader mixes and heats the pre-added silicone raw materials to reach the appropriate viscosity and temperature. During the mixing process, the machine will cut and fold the silicone raw materials to ensure uniform mixing.
• Control and operation: Silicone kneaders are usually equipped with advanced control systems that can achieve precise control of parameters such as temperature, time, speed, etc. Operators can set up and monitor the machining process via the control panel.
• Equipment selection: When choosing a silicone kneader that suits your needs, you need to consider factors such as production scale, silicone formula, mixing requirements, degree of automation, and budget. Make sure to choose equipment that is reliable, stable and efficient.
• Safety precautions: When using a silicone kneader, you should follow relevant safety operating procedures, wear protective equipment, and avoid contact with operating mechanical parts to ensure work safety.

Please note that specific silicone kneader models and specifications may vary by manufacturer. It is recommended that you contact a professional equipment supplier or manufacturer to obtain more detailed and accurate information and make customized selections based on your specific needs.

Precautions for 200L silicone kneader machine

1. Power supply requirements:380V 50Hz
2. The main power cord uses 15 square of copper wire or 30 square of aluminum wire.
3. The main power air switch uses 150A.
4. Reducer oil type, add No. 320 gear oil in summer. In winter, add No. 220 gear oil and add 30 kg. Replace the gear oil one month after first use and every six months thereafter.
5. Add No. 380 thermal oil to the heating jacket and add 40 kg.
6. Add 20 kg of hydraulic oil to the hydraulic oil tank.
7. Add butter to the four bearings once per shift.
8. When starting up the machine for the first time, turn on the main motor first. If the main motor's steering direction matches the factory steering arrow, you can start the hydraulic motor. If it does not match, first adjust the position of any two phases of the main power supply.
9. The usage process of the kneader requires that you start it up first and then add materials.
10. The two large gears on the equipment require a certain amount of butter to be touched on them regularly.