ASME SA283 Gr.C Single Segmental Baffle For Heat Exchanger Application

ASME SA283 Gr.C Single Segmental Baffle For Heat Exchanger Application


Baffles are components of shell and tube heat exchangers which are used to support and fix the tubes in a defined position. There are different types of baffle configurations. The most popular type is the perforated plate in the form of a segmented circle. The segmental baffles are arranged so that the segmented section faces are disposed opposite to each other along a bundle of tubes at specified interval. No Tube in Window (NTIW) baffles, Helically-shaped baffles, full support baffle are other types that can be fabricated in our company. We are professional Baffles Plates For pressure vessel heat exchangers heaters condensers reboilers separators evaporators .

What is the minimum baffle spacing recommended?

Generally between 0.3 to 0.5 off the shell diameter with 50.8 mm (2 inch) being the minimum used

Equation:

0.3 * Shell diameter

to

0.5 * Shell diameter

So if for example we have a shell diameter of 356 mm (14 inch) then the minimum baffle spacing selected should be between 106.8 mm (4.2 inch) to 178 mm (7 inch).

See below for calculations:

0.3 * 356 mm = 106.8 mm (4.2 inch)

To

0.5 * 356 mm = 178 mm (7 inch)

With both values considered valid as they are both above the minimum recommended value of 50.8 mm (2 inch)



Single segmental baffle