PTFE Mist Eliminator Demister Pad Stainless Steel 316L Grids Gas Liquid Separating

PTFE demister mesh stainless steel 316L grids gas liquid separator

PTFE demister characteristics:

The mechanical properties of polytetrafluoroethylene are relatively soft. It has very low surface energy. Polytetrafluoroethylene has a series of excellent performance:

1. High temperature resistance: long-term use temperature 200 ~ 260 ℃;
2. Low temperature resistance: soft at - 100 ℃;
3. Corrosion resistance: resistant to aqua regia and all organic solvents;
4. Weather resistance: the best aging life of plastics;
5. High lubrication: with the minimum friction coefficient of plastic (0.04);
6. Non adhesion: having the minimum surface tension in solid materials without adhering to any substance;
7. It has physiological inertia, excellent electrical performance, and is an ideal C-class insulation material. A thick layer of newspaper can block 1500V high voltage; it is smoother than ice.9.
8. PTFE demister application:

• Reduce loss of valuable chemicals: demister pads markedly cut glycol, amine, or solvent consumption in absorption and regeneration towers.
• Increase throughput capacity: demister pads allow a significant increase in throughput anywhere gases and liquids come into contact in process equipment.
• Improve product purity: demister pads prevent contamination of side draws and overheads in refinery atmospheric and vacuum towers and other distillation columns.
• Minimize contamination: demister pads can prevent the poisoning of expensive downstream catalysts or provide boiler feed water quality condensate from evaporator overheads.
• Provide equipment protection: demister pads protect turbine, blower, and compressor blades, which can eliminate serious maintenance problems.
• Reduce air pollution: demister pads help diminish droplet emissions to environmentally acceptable levels.

PTFE demister efficiency:

When properly designed demister pads can give efficiency up to 99.9% with minimal pressure drop. Normally demister pads can remove droplets down to 5 microns and lower with a free volume of up to 99% and a surface area of up to 1940 m2/m3. Due to high value of free volume the pressure drop across the demister pad is sufficiently low in most applications.

Demister Inquiry Table if Calculation Suggestions and Service are needed

Please pay attention to the Unit when refering to this sheet.

Anping Yuanqiao Petrochemical Equipment Co., Ltd, founded in 2000, covering an area of 50000 square meters, is located in Anping County, Hebei Province, known as the "hometown of Chinese silk screen" and "silk screen industrial base". It is a professional manufacturer of wire mesh demister, vapor liquid filter screen, and steel plate mesh. It is committed to providing reliable quality separation devices for the manufacturing industry, and has the qualification of general taxpayer and independent import and export rights.

The main products of the wire mesh demister series include metal wire mesh demister, plastic wire mesh demister, pp wire mesh demister, drawer type wire mesh demister, embedded wire mesh demister, top mounted wire mesh demister, and bottom mounted wire mesh demister. Wave type wire mesh demister, also known as wave type demister or waveform demister. In industrial production, the removal of various mist, mist, vapor liquid separation, and particle separation in the air can achieve a capture efficiency of 98% -99.8% for mist with a particle size of ≥ 3~5um. It is widely used in gas-liquid separation devices in industries such as chemical, petroleum, tower manufacturing, and pressure vessels for desulfurization, mist removal, water removal, and droplet recovery in environmental engineering.

We are a physical manufacturer specializing in the production of vapor liquid filter screens and their products. Our company mainly produces metal vapor liquid filter screens in three types: stainless steel, copper, brass, alloy, and pure metal. Among the stainless steel materials, 304, 304L, 321, 316, and 316L are widely used, with Monel alloy as the main alloy material and pure nickel and titanium as the main pure metals. Our company mainly produces a series of products with over a hundred specifications and models in four categories: standard type, high-efficiency type, high penetration type, and damping type.

For many years, our company has established stable trade relations with multiple merchants with high-quality products, good reputation, and high-quality services. Our products are widely sold throughout the country and exported to countries and regions such as Japan, Singapore, Taiwan, etc. May we cooperate sincerely and seek common development on the basis of mutual integrity. Warmly welcome your visit