SDB ASTM E662 ISO5659 NBS Smoke Density Chamber

SDB ASTM E662 ISO5659 NBS Smoke Density Chamber

Introduction:

• The Smoke Chamber has proved to be one of the most versatile fire-testing instruments since its inception in the 1980s.
• SDB Smoke Density Chamber is used for measuring the specific optical density of the smoke from burning materials under flaming and non-flaming conditions. It is also used for the extraction of toxic gas.
• This equipment is satisfied with standards (ASTM E 662, BS6401, ISO 5659, NES 711, NEPA 258, etc.).
• Using ISO 5659 conical radiant heat furnace, We can change the heating condition from 10KW/㎡to 5KW/㎡by the user.
• In the test of NES 711, there are non-flaming tests and flaming tests in test conditions different from ASTM E 662.

Standards:

• ASTM: ASTM E662
• ISO: ISO 5659-2
• IMO: FTPC Part 2
• NES: NES 711

Application Field:

• IMO;
• Rail;
• Wire&Cable;

Features:

• The inner dimensions of the chamber are 914mm±3mm long, 914mm±3mm high, and 610mm±3mm deep.
• The inner surface consists of a Teflon coating, which is resistant to chemical attack and corrosion and easily cleaned.
• Test chamber with full-width opening door, allowing easy access for sample loading and chamber cleaning.
• Provided a hinged front-mounted door with an observation window and a removed opaque door cover to the window to prevent light from entering the chamber.
• Chamber walls are pre-heated for easier start-up and convenient equipment operation.
• Safety blow-out panel, easily replaceable, allows for the safe operation of the test method.
• Two optical windows, each with a diameter of 75mm, are mounted at the top and bottom of the cabinet.
• The light measuring system consists of an Incandescent lamp and a photomultiplier tube.
• Provided with a range-extension filter in the light path, adjusting the accuracy of instrument under the any scale.
• Conical Heater - is wound in the form of a truncated cone, rated 2600 W at 230 V with a heat output of 50 kW/m2.
• Auto Split Shutter automatically opened to transmit radiation to the sample, and Spark Igniter to ignite the sample.
• Heat Flux Meter - for setting the irradiance level at the surface of the specimens, the range from 0-100KW/m2.
• Furnace Heater, rated 550W at 110 V with a heat output of 25 kW/m2.
• The movement of the sample is controlled by an air cylinder automatically.
• Air Cooled calorimeter for setting the irradiance level at the surface of the specimens.
• Provided with no pilot flame and pilot flame modes. Digital display flow rate of air and propane.
• Gas measurement ports are provided, for optional measurements of toxic gases.
• 19 analysis racks, 15 touchscreen panel-type PCs for the whole control, and automatic testing.
• DAQ(Data Acquisition) Program controllable with the touch screen panel PC.
• Testing results: Light transmission,Optical density,Mass optical density(MOD),Mass loss rate,the Clear-beam correction factor, etc.

Parameters:

Delta Technology (Chongqing) Co., Ltd. is a high-tech enterprise focusing on R&D, production, and sales of Electric Testing Equipment and Fire Resistance Testing Equipment.

Safety is important to the electrical, construction, and transportation industries, thus, Delta Technology aims to help users test the safety of transformers, high-voltage switches, cables, building materials, transportation materials, etc.

Since its establishment, the company has always adhered to the principles of "quality assurance and service priority", through years of development, our products sell well at home and abroad.

With the best products, best services, and best reputation, our company is your reliable partner in testing equipment!