| Benchtop spectrophotometer | 
| Model | DS-36D | DS-37D | DS-39D | 
| Lighting/measurin g conditions
 | Reflection: d/8 (diffuse illumination, 8° direction reception) | 
| SCI(Contains specular reflected light)/ SCE(not contain specular
reflected light)measure at same time. Compliance standards: CIE No.15, GB/T 3978, GB 2893, GB/T
18833, ISO7724/1, DIN5033 Teil7,
 JIS Z8722 Condition C, ASTM E1164, ASTM-D1003-07
 | 
| Transmission: d/0 (diffuse illumination, vertical reception) | 
| Sensor | Differential spectrum engine | 
| Spectroscopic method
 | Concave grating | 
| Integrating sphere diameter
 | 152mm | 
| Wavelength range | 360nm-780nm | 
| Wavelength interval
 | 10nm | 
| Half-wave width | 1.6nm | 
| Reflectance measurement
 range
 | 0-200%,resolution0.01% | 
| Ultraviolet measurement
 | Includes UV, 400nm cutoff, 420nm cutoff, 460nm cutoff | 
| Measuring time | Single mode <2s | 
| Lighting/measurin g calibers
 | XLAV Φ25.4mm/Φ30mm;LAVΦ15mm/Φ18mm;MAVΦ8mm/Φ11mm;SAVΦ3mm/Φ6mm Users can customize the calibre, and the calibre switch is
automatically recognized
 Transmission:Φ17mm/Φ25mm
 | 
| Transmission measurement
 specification
 | Sample height and thickness: height is not limited, thickness ≤50mm | 
| Long-term repeatability
 | XLAV chroma value: standard deviation ΔE*ab within 0.1 (0℃-40℃
arbitrary temperature change) XLAV chroma value: standard deviation ΔE*ab 0.01 or less (under
constant temperature conditions,
 the white correction plate is measured every hour within 24 hours)
 | 
| Repeatability * | ΔE*ab≤0.01, Spectral
 reflection/transmittance ≤0.1%
 | ΔE*ab≤0.005, Spectral reflection/transmittance ≤0.1%
 | 
| Inter-Instrument Agreement**
 | XLAV ΔE*ab 0.18 | XLAV ΔE*ab 0.12 | XLAV ΔE*ab 0.08 | 
| Standard observer | 2° and 10° | 
| Viewing light source
 | A,B,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,CWF,U30,U35,DLF,NBF,TL83,TL84,ID50, ID65,LED-B1,LED-B2,LED-B3,LED-B4,LED-B5,LED-BH1,LED-RGB1,LED-V1,LED-V2
 | 
| Language | Simplified Chinese, English, Traditional Chinese, Russian, Spanish,
Portuguese, Japanese, Thai, Korean, German, French, Polish
 | 
| Display content | Spectral data, Spectrogram, chromaticity data, chromaticity Data,
chromaticity map, Pass/Fail judgment, Simulation color, Color evaluation, fog, liquid
chromaticity, Color bias
 | 
| Color space | CIE LAB,CIE LUV,LCh,Hunter Lab,Yxy,XYZ,Musell,s-RGB,βxy | 
| Chroma index | WI(ASTM E313-20,ASTM
E313-73,CIE,ISO2470/R457,AATCC,Hunter,Taube,Berger Stensby),YI(ASTM D1925,ASTM E313-20,ASTM E313-73),Tint(ASTM E313-20),Isochromatic
index Milm, color fastness,
 color changing fastness,ISO brightness,R457,A density,T density,E
density,M
 density,APHA/Hazen/Pt-Co(platinum-cobalt index),Gardner(Gardner
Index),Saybolt(Seibert
 Index),Astm color, fog, total transmittance, covering power, force,
intensity
 | 
| Color difference formula
 | ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc,ΔE*94,ΔE*00,ΔEab(Hunter),555 color tone
classification | 
| Storage | 8GB | 
| Screen size | 7-inch capacitive touch screen | 
| Operating system | Android | 
| Power source | Dc regulated power supply | 
| Operating temperature and
 humidity
 | 5 ~ 40°C, relative humidity 80%(35°C) below no condensation | 
| Storage temperature and
 humidity
 | -20 ~45°C, relative humidity 80%(35°C) below no condensation | 
| Accessories | Power adapter, USB cable, transmission fixture, software U disk,
black cavity, white board, green board,30mm aperture, 18mm aperture ,11mm aperture, 6mm aperture,
support table,cuvette,
 | 
| Optional accessories
 | Heating transmission jig (including control circuit), vertical
bracket, pneumatic jacking rod (including control circuit), small sample holding accessories, reflection
cupping plate (non-removable), fiber test
 box, film jig, micro transmission jig, rod box, European standard
plug, American standard plug
 | 
| Port | RS-232,USB,USB-B,Bluetooth | 
| Camera positioning
 | Ultra HD camera(1400dpi) | 
| Automatic calibration
 | √(Can greatly improve the long-term repeatability of the
instrument) | 
| Fluorescence calibration
 | √(Can automatically adjust the UV intensity, and ensure that the
value of the instrument is highly consistent with that of other imported instruments when
measuring materials containing
 fluorescence)
 | 
| Brightness calibration
 | √(Through the brightness calibration algorithm, the real color of
ultra-dark samples is restored) | 
| Others | The instrument can be measured sideways, up and down (using
accessories); Automatic temperature and humidity compensation function; PC side software save sample
image function
 |