Servo Motor Driven Automatic Core Cutting Machine Making Reactor Core Limb

Servo Motor Driven Automatic Core Cutting Machine Making Reactor Core Limb


Description of automatic core cutting machine DHJ400

Automatic core cutting machine DHJ400 is a special cutter equipment, which is mainly used to cut silicon steel strip to make reactor core limbs. This type of automatic core cutting machine can cut different width of silicon steel and the width of the strip can be from 40mm to 400mm. Moreover, the automatic core cutting machine can punch holes on the strip if needing. The automatic core cutting machine’s cutting and punching actions are driven by servo motors, which guarantees the accuracy of the actions.The automatic core cutting machine’s cutter blade adopts carbide cutter knife with HRC88 ~ 90 hardness. The cutter of the cutting machine can cut the silicon steel strips five million times without regrinding the blade. The automatic core cutting machine features high automation, easy operation and so on.


Quick details of automatic core cutting machine DHJ400

• Strip thickness 0.23 ~ 0.35mm
• Strip width 40 ~ 400mm
• Strip length 10 ~ 9999mm
• Feeding speed 180m/min
• Power 12.5kw
• One year warranty

Main components of automatic core cutting machine DHJ400

1.Decoiler
2.Frame
3.Feeding unit
4.Hole punching device
5.Shearing unit
6.Stacking table
7.Control system

Main parameters of automatic core cutting machine DHJ400

Typical standard specifications of automatic core cutting machine DHJ400 are shown below, however, the core cutting machine can also be manufactured as requested.

Fig 1: Automatic core cutting machine DHJ400's full view


Fig 2: Automatic core cutting machine DHJ400's punching unit