3 Pin AC300V Slide Fader 20mm Sliding Contact Potentiometer

1. Resistence:Variable Resistor
2. Resistance:Load Resistor
3. Installation:DIP Resistor
4. Material:Carbon Film Resistor
5. Type:Slide potentiometer

Specification

Electrical Characteristics for slide potentiometer

1.1 Total Resistance: 1KΩ~1MΩ
1.2 Total Resistance Tolerance: 500 Ω <R<1MΩ: ±20%
R< 500Ω or R>1M Ω:±30%
1.3 Resistance Taper: A, B, C
1.4 Withstand Voltage: 1 minute at AC 300V
1.5 Insulated Resistance: More than 100MΩ at DC 250V
1.6 Sliding Noise: Less than 100mV
1.7 Residual Resistance: 20mm: Term.1~2: Less than 10Ω;
Term.2~3: Less than 20Ω
30mm, 45mm, 60mm: Term.1~2: Less than 10Ω;
Term.2~3: Less than 30Ω
Gang Error (Dual Unit):-40dB~0dB±3dB
Rated Voltage: Linear Taper B:15mm:AC 100V;
20mm,30mm,45mm,60mm:AC 200V;
Other Tapers:15mm:AC 50V;
20mm,30mm,45mm,60mm:AC150V
1.8 Rated Power (Single Unit/Dual gangs): Linear B Taper: 15mm:0.05W/0.025W
20mm:0.1W/0.05W, 30mm:0.2W/0.1W,
45mm:0.25W/0.125W, 60mm:0.2W/0.2W;
Other Tapers:15mm,0.025W/0.012W,
20mm:0.05W/0.025W, 30mm:0.1W/0.05W,
45mm:0.125W/0.06W, 60mm:0.1W/0.1W

Mechanical Characteristics

2.1 Level push-pull strength: 3.0Kgf Min at 10 Sec.
2.2 Slide torque: 10gf~100gf
2.3 Stopper Strength: 5.0Kgf Min (from the base level to a point of 2mm)
2.4 Detent Torque (only center click):50gf~200gf
2.5 Level Wobble: 2(2xL)/20mm Max. (L: Level length both sides)

Durability

3.1 Sliding Life: Standard life: 15,000 Cycles Min.;
Long life: 100,000 Cycles Min

Company Introduction

​Dongguan TianQian Electronics Co., Ltd.established in 2013,it is specialized in design, development and production of high precision components such as Rotary Potentiometer, Sliding Potentiometer, Foot Switch, Band Switch, AC Switch, Sensor, Encoder, Tact Switch and Connectors. The products are widely used in Dimmable Lighting, Audio Mixer, Home Appliances, Automobile, Multimedia, Audio Equipments, Instrument, Toys, Aviation Model and Communication Equipments. We have an area of 3,000 square meters of factory building. Our R&D team members have more than 20 years experience in the component industry. In order to meet the high quality demand from worldwide customers, we widely use automated production lines which can output more than 80% of annual production capacity. It takes pride in the achievement that we have been the key supplier of JVC, Brother, , Midea, Microsoft, Honeywell, Sennheiser, Primax and GGEC...etc. With the consistent enterprise principles "Striving Excellence" & "Quality Assurance", we hope both parties can establish a mutual benefit relationship and create a win-win situation.