Shipyard Marine Floating Docking Rubber Balloon Ship Launching Airbags

Shipyard Marine Floating Docking Rubber Balloon Ship Launching Airbags

Overview of ship launching airbags

1. Qingdao Florescence specializes in the production of ship rubber airbags since 1992.

2. Rubber airbags use the best materials (Thailand natural rubber RSS3) and can reuse for 6-8years without misuse.

3. Our factory paid attention on product quality for over 30 years to make sure our customers use well.

4. Wear resistance and anti aging airbag with ISO, CCS, BV, IRS, RS, etc certificate.

5. Need no more than air compressors, winches and ropes. Much cheaper and more portable than other methods.

6. We support customer worldwide, such as America, Philippines, Indonesia, UAE, Saudi Arabia, etc.

Structure of marine rubber airbag

Marine rubber airbags have the best designed structure which consists of five different functional membranes in rubber layers.

1) Outer rubber layer

The outer rubber layer that covers the outside of marine airbag to protect under layers from abrasion and other external forces. This compound has sufficient tensile and tearing strength to withstand any condition and hard usage.

2) Inner rubber layer

The inner rubber layer seals pressurized air inside marine airbags.

3) Synthetic-tire-cord layer as reinforcement

The reinforcement cord layers, which are made of synthetic-tire-cord commonly used in tires, are arranged at ideal angles to hold the internal pressure and distribute stress evenly. So they can provide strong efficient reinforcement.

Features of ship landing airbag

1. High strength: The polyamide cord thread for airbag is produced with high tension reinforced fiber. A cord thread has the strength more than 32N, and the cord fabric has consistent and reliable quality.
2. Wear resistance and anti-aging: An airbag often works in extreme conditions.For example, it is soaked in sea water, insolated in the direct sunlight and rolled in sand. Our marine airbag has high wear resistance and anti-aging ability, and the service life as long as 8-10 years.
3. Good air tightness: Our factory use high quality natural rubber and advanced manufacture process to assure that our products have good air tightness.
4. Safety and reliability: Marine airbag has the safety coefficient of 4-6 times, means that its bursting pressure is 4-6 times its work pressure.

How to launch ship by marine airbag

Step1: Prepare the launching slipway and related workers. As per calculation, select and check the appropriate marine airbags and quantity. Tidy up the launching slipway. Fix the ship by winch and anchors. Prepare all the necessary equipments.
Step2: Taking out all standing blocks under stern and middle one by one, and put in airbags. The distance between two rows should be confirmed as per the calculation.
Step3: Taking out all standing blocks under the prow. Run the winch and release the cable. Let the ship launch to water.
Step4: After launching, check all the deckhouse to confirm if there is any problem. Meanwhile, retrieving all the airbags.

Factory established in 1992, Qingdao Florescence Marine Supply Co., Ltd (Subsidiary of Qingdao Florescence Co., Ltd) specializes in manufacturing pneumatic rubber fenders, foam fenders, various ship dock rubber fenders, and ship launching & salvage rubber airbags.

FLORESCENCE products are designed, manufactured, and tested by per ISO 9001:2015 requirements. And every unit is robustly built to the stringent requirements of ship surveyors such as CCS, BV, RS, ABS, LR, etc.

We are the supplier of many navy, such as Bangladesh Navy, France Navy, Greece Navy, Thailand Navy, Italy Navy, Philippines Navy, etc.

FLORESCENCE considers our clients as a part of the team, treating them as partners. We are always together with them on each step of the way, from finding the solutions of fender using and ship launching to the manufacturing and installation operations on site. Our rich experience has earned us a reputation as a dependable partner in many ports and shipyards around the world.