2.4kW Anodizing Line Accessories Multistage Centrifugal Pump Horizontal

CHM Light Horizontal Multistage Centrifugal Pump

Application

The CHM pump is mainly used in industry:

● Air conditioning system

● Cooling system

● Industrial cleaning

● Water treatment (purification of water)

● Aquaculture

● Fertilization/metering system

● Environmental applications

● (Other) Many specialized and specific uses

Conveying liquids

● A thin, clean, non flammable and explosive liquid that does not contain solid particles or fibers.

The pump can transport materials such as mineral water, softened water, pure water, clear oil, and other light chemical media.

When the density or viscosity of the conveyed liquid is greater than that of water, a high-power motor must be equipped if necessary.

The suitability of a pump for a specific liquid is determined by multiple factors, including

The most important factors are chlorine content, pH value, temperature, solvent, oil content, etc.

Operating conditions

Liquid temperature: room temperature type -15 ℃ to+70 ℃

Hot water type -15 ℃ to+105 ℃

Maximum ambient temperature:+40 ℃

Maximum operating pressure: 10 bar

Maximum inlet pressure is limited by maximum operating pressure

Curve conditions

The following conditions apply to the performance curve shown later.

All curves are based on the measured values of a motor with a power of 0.25kw at a constant speed of 2850rpm, and other motors with power at a constant speed of 2900rpm.

The curve tolerance complies with ISO9906:2012.3B level.

The test uses water without air at 20 ℃, with a kinematic viscosity of 1mm²/s.

The use of pumps should refer to the performance range of the bold curve to prevent overheating caused by low flow rate and motor overload caused by excessive flow rate.

Model Meaning

CHM Example

Motor

The motor is a fully enclosed, air-cooled two pole motor.

● Protection level: IP55

Insulation level: F

Standard voltage: 50Hz: 1x220-240V

3x220-240V/380-415V

The maximum power of a single-phase motor is 2.4kW.

Pump

Horizontal multi-stage non self priming centrifugal pump with extended shaft motor.

The compact structure makes the pump size very small, with axial inlet and radial outlet.

MEI-AL Technology has been committed to serve the aluminum profile surface treatment industry with its strong technical force, excellent production and processing, scientific management methods and excellent management style. Mei-al main production: anodizing, coloring, electrophoresis production line, products have special high-power silicon control rectifier, high-power high-frequency switching power equipment, electrophoresis workshop pure water equipment(RO machines), refining equipment, electrophoretic paint recovery equipment, electrophoresis curing furnace,loading and unloading machines,1T+1T professional anodizing cranes, anodizing tank temperature control system and production line automatic control system, etc.

In our perpetual effort and support of our partners in the industry,MEI-AL Technology  has obtained outstanding achievements and is still maintaining a rapid development speed.With the operation spirit of “Professional, Concebtration, Integrity, Co-win”, MEI-AL Technology will provide with you excellent products and perfect services, in the rooted concept of Growind Up with You !

catalogue uploading:

PDF Gallery_20240719_102320.pdf01_0.pdf04.pdf07.pdf10_0.pdf12.pdf15_0.pdf18.pdf