Beiqi Zhenjiang N60 Side Line Project/BIW Engineering

Beiqi Zhenjiang N60 Side Line Project

1. Project name:

Beiqi Zhenjiang N60 Side Line Project

2. Project time:

May 2019

3. Project location

Beiqi Zhenjiang Plant

4. Project introduction:

Models: BE21 platform (current N60/N61 models, 2 models reserved) 4 models

Capacity: 30JPH

Beat: 108S

Robot: KUKA brand, quantity 25

Model switching form: side tetrahedral turntable, seven-axis slide table, cross slide table switching library system, grasping visual guidance system, AGV material supply system, EMS system, robot automatic glue coating system

4. Core technology:

1. Tetrahedron turntable around the side and seven-axis sliding table technology

2. Cross-sliding table switching library system, grasping visual guidance system, AGV material supply system

3. A EMS system, robot automatic gluing system

Analysis on the structure and working principle of the transmission device of the automobile welding production line

Taking the transmission device of the automobile side panel assembly as an example, its structure and working principle will be analyzed in detail below.

The transmission device of the side panel assembly line of a certain vehicle type adopts a four-station reciprocating rod device, which can realize horizontal and vertical movement. The structure and function analysis of each sub-assembly is as follows:

The base board structure of each station

The base plates of each station are connected together through connecting plates to form the supporting device of the entire automobile welding line, which must support both the entire transmission device and the welding fixture. In addition, in order to ensure that the datum of the fixture and the body parts are consistent, draw the datum scale line on the base board according to the design datum. The leveling device in the figure mainly plays a role in leveling the entire transmission device.

The above is the main structure of the transmission device, and there are some auxiliary devices in addition:

Buffer locking device

A total of 4 buffer locking devices are installed in the welding line transmission device, which are respectively distributed at both ends of the jacking frame, mainly to buffer and lock the horizontal movement of the "moving slide". The specific process is: when the "moving slide" is about to move to the end of the transmission device, it contacts with the buffer to slow down the movement speed: when the "moving slide" moves to the end of the transmission device, the travel switch commands the cylinder to clamp and fix on the moving The limit block on the slide plate thus plays a locking role. The device realizes the slow start and slow stop movement requirements of the transmission device of the automobile welding line, and ensures the safe and reliable operation of the transmission device.

7. Safety device

This device is set up 3 on the whole transmission device, and its main function is to jack up the whole "lifting frame" to facilitate maintenance by workers.

Kinte provides systematic solutions for the intelligent logistics system by scientific research & development and technological standard innovation, forming three main business sectors of Quality and Technical Services, Intelligent Equipment, Environmental Protection Coatings and Resin. Serving more than 10,000 customers annually, covering more than 30 countries and regions around the world, it has become an active practitioner of “the Belt and Road” initiative.

KINTE has undertaken a large number of national, provincial and municipal knotty-problem-tackling scientific research projects. From 1998 to 2021, over 600 scientific and technological achievements were made, including over 380 outstanding scientific and technological achievements, of which there are 9 national achievement awards, 146 provincial and ministerial achievement awards, and 63 municipal achievement awards. Over 100 national patents have been awarded , with the transformation rate of scientific and technological achievements reaching up to 85%.

KINTE has won the national technological market “Golden Bridge Award” for five times in 10 consecutive years, which holds every two years. Besides, Kinte owns multiple certificates, such as “Certificate for Foreign Engineering Contract of the People’s Republic of China” issued by the Ministry of Commerce of the People’s Republic of China (the only company with this certificate in Chinese household electrical appliance industry), “Engineering Design Certificate (Class A)” issued by the Ministry of Housing and Urban-Rural Development of the People’s Republic of China and “Special Engineering Design Qualification Certificate” issued by the Ministry of Environmental Protection of the People’s Republic of China.

Powerful Basic Strength
Strong Scientific Research Capacity
Extensive Engineering Experience
Perfect Service System

• A wholly owned subsidiary of SINOMACH (a central government governed enterprise, ranked 250th among World Top 500).
• Enterprise with bank credit of AAA level.
• 14 wholly owned or holding industrial subsidiaries.
• Completed more than 300 turnkey projects.
• Customers from more than 30 countries and regions.
• Holding the “Certificate for Foreign Engineering Contract of the People’s Republic of China”.
• Internationally : We set agency and after-sales service points in countries such as India, Saudi Arabia, Iran, Egypt, Turkey, Brazil, Algeria, Pakistan, etc..
• Marketing center: Offer 24-hours hotline and email service.
• Dedicated after-sales service department.