OEM ODM Tungsten Carbide Lathe Tool Inserts CNC Lathe Cutting Tool

OEM ODM Tungsten Carbide Lathe Tool Inserts CNC Lathe Cutting Tool

CNC Lathe Cutting Turning Tool Tungsten Carbide Milling Insert Groove Thread Machine Aluminum

Essential information

The tungsten carbide insert is made of cemented carbide. The cemented carbide is an alloy material made of hard compound of refractory metal and bonded metal through powder metallurgy process.

Cemented carbide has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance and corrosion resistance, especially its high hardness and wear resistance, which are basically unchanged even at 500 ° C, and still have a high hardness at 1000 ° C.

• Classification

Carbide inserts are mainly divided into turning inserts, milling inserts, groove inserts, thread insert and aluminum inserts. Different types of inserts correspond to different processing, and the most suitable processing insert can be selected according to their own processing needs.

A. Turning inserts: The tool used for turning is one of the most widely used tools in cutting.

B. Milling inserts: It is a rotating tool with one or more cutter teeth used for milling, mainly used for machining plane, step, groove, forming surface and cutting workpiece on the milling machine.

C. Groove inserts: slotting or cutting.

D. Thread inserts: used for thread cutting on turning machine.

E. Aluminum inserts: special inserts for processing aluminum.

​

• Recommended cutting parameters

The principle of reasonable selection of cutting amount: during rough machining, the main task is to improve labor productivity, and the larger cutting amount is selected; during semi-finishing and finishing, the smaller cutting amount is selected to ensure the processing quality of the workpiece.

• Notice:

1. The carbide insert shall not be collided or dropped on the ground and must be handled with care.
2. Before installing the tungsten carbide insert, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
3. After installation, it is necessary to confirm whether the central hole of the tungsten carbide insert is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
4. When using, do not exceed the specified high speed
5. When the tungsten carbide lathe insert is not used, hang the blade vertically on the dry shelf.

​

• Applications:

Our carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: