Product Details
Company Profile

7.5KW 10 Hp Variable Frequency Drive

VFD Top Manufacturer Single Phase 3phase 7.5KW 10HP Frequency Converter

ZK S100 series frequency Converter mainly features:

S100 is a high reliability and high software performance motor drive with rich and perfect software&hardware functions to meet the application needs of most industrial sites;
S100 can drive asynchronous motor and permanent magnet synchronous motor(PMSM) simultaneously. It could run with vector control without PG card, vector control with PG card, speed/torque control and position servo control.
Adopt advanced software vector control algorithm, which can provide high performance open loop vector control for asynchronous motor and synchronous motor. Meanwhile, simple vector control of asynchronous motor and synchronous motor can be used to meet the requirements of general speed adjustment application.
Built-in PID controller, the improved PID function can satisfy most of the on-site process control, such as the closed-loop control of temperature, pressure and flow.
Multiple protection function to ensure the safety of the drive and motor.
Standard 485 communication interface, support Modbus/RTU communication protocol, direct and upper computer communication for field bus control; Profibus-DP and CAN function also optional.

Technical specifications:

Items		Specification
Control mode	Control mode	V/F control	Sensorless in open loop	Close loop vector control
	Starting torque	0.5Hz 150%	0.5Hz 180%	0.00Hz 180%
	Speed adjust range	0: 50	1:100	1:1000
	Speed stabilizing precision	±1%	±0.1%	±0.02%
	Torque precision	NO	NO	±5%
	Motor type	General induction motor permanent magnet synchronous motor (PMSM )
Function design	Highest frequency	General vector control :320Hz V/f control: 3200Hz
	frequency resolution	Digital setting: 0.01Hz Analog setting:maximum×0.025%
	Carrier frequency	0.5K～16KHz, the carrier frequency can be adjusted by temperature automatically
	Frequency reference setting method	Digital of Control panel, analog AI1, AI2, potentiometer of control panel, UP/DN control, communication, PLC pulse frequency
	Acceleration./deceleration characteristic	Linear curve and S curve accel. /decel. mode, range of time: 0.0 to 65000S.
	V/F curve	3 mode: linear, multiple points, N Power
	V/F separation	2 times separation: totally separation, half separation
	DC braking	DC braking frequency: 0.0 to 300Hz, DC braking current: 0.0% to 100%
	Braking unit	Standard built in for up to 4T22G (22kw), optional built it for 4T30G～4T110G (30kw to 110kw), external built for above 4T160kw .
	Jog function	Job frequency range: 0.0 to 50.0Hz, the acceleration and deceleration time of Jog
	Configured PID function	Easy to perform pressure, flow, temperature close loop control.
	PLC multiple speed	To achieve 16 segment speed running through built in PLC or terminal control
	Common Dc bus	Multiple drives use one DC bus for energy balance.
	Auto voltage regulation (AVR)	Enable to keep output voltage constant when grid fluctuation
	Over load tolerance capability	G type model: 150% rated current for 60s, 180% rated current for 3s, P type Model: 120% rated current for 60s, 150% rated current for 3s.
	Stall protection control when over current, over voltage	Carry out limiting automation for running current, voltage to prevent over current, over voltage frequently
	Rapid current limit function	Minimize the IGBT module broken to protect the AC Drive, maximum reduce the over current fault.
	Torque limit and torque control	"Excavator" characteristics , torque limit automatically during motor running. Torque control is available in close loop vector control mode.
Features	Friendly interface	Display “Hello” when power on.
	Multiple function key JOG button	It can set for Forward Jog, reverse Jog, forward/reverse switch
	Timing control function	A total running time and total running time calculating
	2 group motor parameters	To achieve two motor switchover freely, control mode is selectable
	Motor over heat protection	Accepting motor temperature sensor signal input via AI1 terminals.
	Multiple kinds encoder *	Compatible collector PG, differential PG, and rotary transformer Encoder( resolver).
	Command source	Control panel, control terminals, series communication, switch freely.
	Frequency source	Digital setting, analog current/voltage, pulse setting, serial communication, main and auxiliary combination.
	Protection function	Short circuit detect when power on, input/output phase loss, over voltage, over current, under voltage, over heat, over load protection.
Environment	Application site	Indoor, free of exposure to sunlight, no dusty, no corrosive, no inflammable gas, no oil and water vapor, and water dipping
	Altitude	Lower 1000m
	Environment temperature	-10℃～+40℃, power derated for 40～50℃, rated current derated 1% for 1℃ increasing.
	humidity	Less than 95%, no water condense.
	storage	-40～+70℃
	IP degree	IP20 (IP54 is avaliable)

Input voltage and power range:

Power	Voltage	Phase
0.75KW~2.2KW	220V~240V	single phase input & single phase output
0.75KW~7.5KW	220V~240V	single phase input & 3 phase output
0.75KW~132KW	220V~240V	3 phase input& 3 phase output
0.75KW~800KW	380V/440/480V	3 phase input& 3 phase output

2.3 S100 VFD model number and related current, voltage

2.3.1 Single phase 220v, 50/60Hz

Model Number	KVA	Input current(A)	Output current(A)	Adaptable motor(KW)
S100-2S-0.4GB	1	3.4	2.1	0.4
S100-2S-0.7GB	1.5	5	3.8	0.75
S100-2S-1.5GB	3	5.8	5.1	1.5
S100-2S-2.2GB	4	10.5	9	2.2

2.3.2 Three-phase 220v,50/60Hz

Model Number	Power capacity (KVA)	Input current(A)	Output current(A)	Adaptable motor(KW)
S100-2T-0.4GB	1.5	3.4	2.1	0.4
S100-2T-0.7GB	3	5	3.8	0.75
S100-2T-1.5GB	4	5.8	5.1	1.5
S100-2T-2.2GB	5.9	10.5	9	2.2

2.3.3 Three-phase 380v±15%, 50/60Hz

Model Number	Power capacity (KVA)	Input current(A)	Output current(A)	Adaptable motor(KW)
S100-4T-0.7GB	1.5	3.4	2.1	0.75
S100-4T-1.5GB	3	5	3.8	1.5
S100-4T-2.2GB	4	5.8	5.1	2.2
S100-4T-4.0G/5.5PB	5.9	10.5	9	3.7
S100-4T-5.5G/7.5PB	8.9	14.6	13	5.5
S100T-4T-7.5G/11PB	11	20.5	17	7.5
S100-4T-11G/15PB	17	26	25	11
S100-4T-15G/18.5PB	21	35	32	15
S100-4T-18.5G/22PB	24	38.5	37	18.5
S100-4T-22G/30PB	30	46.5	45	22
S100-4T-30G/37P	40	62	60	30
S100-4T-37G/45P	57	76	75	37
S100-4T-45G/55P	69	92	91	45
S100-4T-55G/75P	85	113	112	55
S100-4T-75G/90P	110	153	150	75
S100-4T-90G/110P	130	182	180	90
S100-4T-110G/132P	160	214	210	110
S100-4T-132G/160P	192	232	253	132
S100-4T-1G/P	**	**	**	**

Product Tags:

3phase 10 Hp Variable Frequency Drive

7.5KW 10 Hp Variable Frequency Drive

10hp vfd

7.5KW 10 Hp Variable Frequency Drive

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen ZK Electric Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	VFD Frequency Inverter
Brand Name:	ZK
Model Number:	S100T-4T-7.5G/11PB
Certification:	CE IEC
Place of Origin:	China
MOQ:	1 PIECE
Price:	USD 168-180 per piece
Payment Terms:	T/T, L/C, Western Union
Supply Ability:	2000pcs per week
Delivery Time:	3-10days
Packaging Details:	Carton box with flim
Inverter name:	frequency converter
Control mode:	V/F control, Open/close loop
Starting torque:	0.5Hz 150%
Motor type:	General induction motor permanent magnet synchronous motor (PMSM )
V/F curve:	3 mode: linear, multiple points, N Power
Rated power:	7.5KW 10HP
Rated current:	17A
Waterproof:	IP20