Polypropylene fiber mesh form

FUNCTION:

• Increase seepage resistance
• Prolong endurance
• Improve steel protection
• Increase cracking resistance
• Increase fire resistance
• Strengthen spurt & fatigue
• Improve tensile, bending & folding strength
• Improve plastic deformity
• Strong acid & alkali resistance and good endurance

APPLYING INSTRUCTION:

1. Length : Generally, the proper length of the fiber added into concrete is 20 mm, and in the spray concrete is 10mm.
2. Ratio Design: Usually the proper amount of fiber to concrete is 0.9kg/m3 , and the water-proof layer of the bridge requires 1.35-1.8kg/m3, and the spray concrete in the tunnel is also the same and other materials remain the same. The ratio of fiber and concrete can be determined by tests for special purposes. The fiber has better effects on the concrete with active compound materials, such as silicon ash, coal powder, ground slag and zeolite powder.
3. Mixer Adoption: Double-axle horizontal compelling mixer is better and self-dropping cylinder mixer can be used, too.
4. Mixing Process: Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes, fiber will fully spread and then add cement and water and stir normally. The addition of materials also can be put into as usual, but the stirring time should be properly prolonged to make fiber completely mixed.
5. Stirring Time: The purpose of the stirring is to make fiber fully spread into monofilament or the net fully spread, so generally the stirring time is 2-3minutes after the addition of polypropylene fiber-mesh.

SUITABLE PROJECT:

1. Be suitable for the water–proof layer, floor, inner &outer wall of industrial and civil construction.
2. Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
3. Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch. D). Be suitable for any mortar projects and fine aggregate concrete projects.

SPECIFICATION:

Packing: 1kg per PE bag, 20kg per plastic woven bag. 11500kg in a 20ft.

1kg per PE bag, 18kg per carton, 450 cartons in a 20ft.

Packing image

Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China.  who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry. 

In the same year, we cooperated with Alibaba for developing export business and became to be one of the top suppliers in Chemical field.

In Year of 2017, the Hongkong Briture Co., Limited was founded. 

Since 2018, Briture was verified by SGS.

Briture is dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfication. During our production, we test the quality from every batch and check again before shipment to ensure the quality. In order to keep the stable quality for customers, we never change the materials source. We believe our quality and service will bring success to each customer. No matter selecting a current product from our company or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We sincerely welcome your cooperation, and look forward to building business relationship with you.

Briture, your reliable partner in China.