Product Details
Company Profile

Zetron MIC100 IP65 Co Gas Monitor Industrial Carbon Monoxide Fixed

MIC100 Series

Online Toxic and Harmful Gas Detector

without Display

OVERVIEW

MIC100 Series gas detector can be used in 24 hours continuous
online monitoring of concentrations of single gas in the filed.The
types for detection are more than 500 types.
With an output, can be simply integrated into a Distributed Control
System (DCS) to provide warnings and enable control of high levels
in the working environment.
Simple to install service and calibrate, MIC100 Series require no
hot work permit and the PID sensor is accessible and changeable in
a matter of seconds.
Strong, durable and explosion-proof shell and fluorocarbon surface
treatment process are suitable for the use at a variety of
hazardous places and corrosive environments, it is wear-resistant.

FEATURES & BENEFITS

Imported Sensors, Accurate, Fast and Stable

①It can be used in 24 hours continuous online monitoring of gas
concentration, and the types for
detection are more than 500 types.

②The gas units can be customized : Normally PPM, %Vol, %LEL, other:
mg/m3,PPHM, ppb, mg/l.

Diversified Data Communication Methods

① It is possible for the real-time monitoring via the wired or
remote wireless transmission,

and network transmission.
② Three-wire system 4 ~ 20mA standard signal and standard bus RS485
(mod bus-RTU)

simultaneous output.
③ It is possible to select frequency output 200-1000Hz, Hart
protocol signal, 1 ~ 5V output,

SMS alarm, wireless transmission .
④ It is compatible with GPRS, PLC, DCS system, and it is possible
to drive the related equipment.

⑤ Two set of relay switch measures ports ( upper and lower limits)
output:dry contact,

capacity 30V 1A, 125VAC 0.5A.

Infrared Remote Control

Standard configuration includes the infrared remote control, it is
possible for one-key operation via

infrared remote control function key, which can achieve the
operation without opening the cover under

hazardous situations. such as: the functions like modification of
the alarm point, density calibration,

zero-point calibration, noise reduction, restoring the factory
setting, and so on.

Multiple Optional Functions, Meet the Personalized Needs

Sound-light alarm (integrated or external)

AC pump

Brushless dc pump

Vacuum pump

Water vapor filter cylinder

Room-temperature automatic dehumidification and drainage system

Room-temperature manual dehumidification and drainage system

High-temperature flue gas pretreatment system

SPECIFICATION

Gas	Carbon Monoxide	Sensor	Electrochemical
Range	0-500,1000,2000ppm Can be customized	Resolution	0.1 ppm; Can be customized
Smapling Method	diffusion/pump	Control Method	Controller/Infrared remote control
Allowable error	≤±3% FS; Can be customized	Work Method	24-hour continuously monitoring
Response time	T90≤20 seconds;Can be customized	Recovery time	≤10 seconds; Can be customized
Working Temp	-20 ℃ ~ + 70 ℃;(Standard Values)	Humidity	10 ~ 95% RH
Working Temp	-40 ℃ ~ + 80 ℃;(Limit Value)	Humidity	10 ~ 95% RH
Voltage	≤2.5 W(DC24V)	Power	12～30VDC
Protection level	IP65	Explosion-proof	Exd Ⅱ CT6
Alarm	Audible；Light(option)	Display	LCD/without LCD Display
Cable	PVVP3 * 1.0mm 2	Transmission Distance	≤1000m
Installation	Wall-mounted；Ceiling-mounted；Vertical pipe-mounted; Horizontal pipe-mounted
Output	① Three-wire system 4 ~ 20mA standard signal, and it is possible to work with controller module, PLC, DCS system.
	② Standard bus RS485 (mod bus-RTU) simultaneous output, and it is possible to view the stored data on the computer via RS232 card.
	③ Two set of relay switch measures ports ( upper and lower limits) output:dry contact, capacity 30V 1A, 125VAC 0.5A.
	④ Voltage Signal Output: can set 0-5v, 0-10v signal output (optional).
	⑤ Other Output: Frequency, Hart, Wireless , GPRS, NB etc.
Size(mm)	18014092	Weight(Kg)	1.6
Kit	Manual, qualification certificate, warranty card, outer packaging box

APPLICATION

All the cases which requires the fixed installation, and online detection of gas concentrations such as petroleum, chemical, pharmaceutical, environmental protection, combustion gas distribution, warehousing, smoke gas analysis, air governance, and so on.

Product Tags:

ip65 co gas monitor

zetron co gas monitor

ip65 carbon monoxide gas detector

Zetron MIC100 IP65 Co Gas Monitor Industrial Carbon Monoxide Fixed

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing HiYi Technology Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Single Gas Detector
Brand Name:	HiYi
Model Number:	MIC100
Certification:	CE
Place of Origin:	China
MOQ:	1
Payment Terms:	L/C, D/A, D/P, T/T, Western Union, MoneyGram
Packaging Details:	paper case
Product name:	Carbon Monoxide Fixed CO Gas Monitor
Type:	fixed gas detector
Gas:	CO gas
Weight:	1.6(kg)
Size:	18014092mm (LHW)
Warranty:	12 Months

Zetron MIC100 IP65 Co Gas Monitor Industrial Carbon Monoxide Fixed

Zetron MIC100 IP65 Co Gas Monitor Industrial Carbon Monoxide Fixed

Zetron MIC100 IP65 Co Gas Monitor Industrial Carbon Monoxide Fixed

Imported Sensors, Accurate, Fast and Stable

ip65 co gas monitor

zetron co gas monitor

ip65 carbon monoxide gas detector

Zetron MIC100 IP65 Co Gas Monitor Industrial Carbon Monoxide Fixed