Original FTLX8571D3BNL Module 10G 300m Fiber SFP 850nm Transceiver

Original FTLX8571D3BNL Module 10G 300m Fiber SFP 850nm Transceiver

Finisar FTLX8571D3BNL Optical Module 10G 300M Fiber SFP 850nm Transceiver

FTLX8571D3BCV Optical Module Fetures:

Hot-pluggable SFP+ footprint

• Supports rate selectable 1.25 Gb/s or 9.95 to 10.3 Gb/s bit rates

• Power dissipation < 1W

• RoHS-6 compliant (lead-free)

• Commercial temperature range 0°C to 70°C

• Single 3.3Vpower supply • Maximum link length of 300m on 2000 MHZ-km MMF

• Uncooled 850nm VCSEL laser

• Receiver limiting electrical interface

• Duplex LC connector • Built-in digital diagnostic functions .

APPLICATIONS

• 1000BASE-SX 1G Ethernet

• 10GBASE-SR/SW 10G Ethernet

Feature of FTLX8571D3BNL

Finisar FTLX8571D3BNL Extended temperature SFP+ transceivers support the 2-wire serial communication protocol as

defined in the SFF-8472. It is very closely related to the E2 PROM defined in the GBIC standard, with the same electrical

specifications. The standard SFP+ serial ID provides access to identification information that describes the transceiver’s

capabilities, standard interfaces, manufacturer, and other information. Additionally, Finisar SFP+ transceivers provide a

enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as

transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply

voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating

parameters are outside of a factory set normal range. SFF-8472 defines a 256-byte memory map in E2 PROM that is

accessible over a 2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic monitoring interface

makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged. The

interface is identical to, and is thus fully backward compatible with both the GBIC Specification and the SFP Multi Source

Agreement. The complete interface is described in Finisar Application Note AN2030: “Digital Diagnostics Monitoring

Interface for SFP Optical Transceivers”.

The operating and diagnostics information is monitored and reported by a Digital

Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. When

the serial protocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks

data into the SFP transceiver into those segments of the E2 PROM that are not write-protected. The negative edge clocks

data from the SFP transceiver.

The serial data signal (SDA, Mod Def 2) is bi-directional for serial data transfer. The host

uses SDA in conjunction with SCL to mark the start and end of serial protocol activation. The memories are organized as a

series of 8-bit data words that can be addressed individually or sequentially. For more information, please see the SFF-

8472 documentation and Finisar Application Note AN-2030. Please note that evaluation board FDB-1027 is available with

Finisar ModDEMO software that allows simple to use communication over the 2-wire serial interface.

Products And Aervices Provided 

Topstar is one of the leading manufacturers of Fiber Optical transceive module since 2006, located in China capital of technological innovation- Shenzhen City；

Our main products included OEM compatible sfp optical transceiver, 10G SFP+ optical module, 25G SFP28 module, 40G QSFP+ module, 100G QSFP28 module to 400G optical modules used for Ethernet network, and some fiber accessories like, DAC cable, AOC cable, patch cable, ethernet server adapter etc...

We are also re-seller of original sfp transceiver like Finisar/ Brocade /Cisco/Innolight/AOI/Avago/Juniper/Dell/WTD, and we also offer Brocade FC SFP Transceiver, SAN switch, blade, fan assembly and POD license kit for storage area network solutions；

Main Market And Customer Groups

Our company invests large fund and brains to research products to fit the demand Of the market. High level research group, advanced professional testing equipments like Error Detector, Industrial Oven, Agilent Oscilloscope,Digitizer,Wave Runner to ensure the stable and reliable quality with qualification rate 99.97%; Our products are mainly sold To telecom operators, IDC data centers, government departments, internet service provider and system integrator in abroad, Such as US, UK, Germany, Denmark, Russia, Australia, Korea, Singapore, Indonesia, Nepal, Mogolia, Brazil, Peru, Israel, Turkey, and so on.

Customer Case

Topstar has cooperated with customers from all over the world: II-VI China company, USA Florida Data Center, China Telecommunication backbone network projects ,Mogolia Telecom projects, Nepal operator,Dubai Telecom,South American data centre , EXFO worldwide optical test solutions etc. and build a long-term cooperation relationship with more than 800 customers globally.

Industry Status And Influence

Topstar, established in 2006, is a manufacturer of Fiber Optical transceiver module. After 16 years' effort and development, now we have become one of the leading sfp transceiver manufacturers and suppliers in China. We are always keeping very kind relationship with many strong IDC data center and telecom company, we have been enjoying high reputation in optical transceiver market domestically and internationally.

Topstar Culture

Our Vision--Create Topstar’s home and strive to be a respected Century Enterprise！

Our Mission--Better Communication, Better World !

Our Values--Struggle happily, to be honesty and gratitude, then to be progressive and achieve others;

Organizational Structure&Company Advantages

We also has bridle-wise manage team ,R&D team and QC team ,and can supply customer their desired sample in the earliest date , arrange your order correctly, strictly control the mass production quality and lead time , and let the business goes smoothly !

Topstar owns Shenzhen Baoan OEM/ODM Factory, Shenzhen Longgang Sales Company, USA San Francisco Office,Shenzhen warehouse and HONGKONG warehouse to offer the One-Stop souring of high quality product platform for our customers.

Technical Strength

Topstar proudly own 5,000 Square Meters complete Dust-Free workshop. Together with our 20 dedicated engineering experts in the R&D, we create excellent products. Applying the industrial best Management Practice combined with full range of test equipments, we stand to be the expert in Optical Transceiver field. These expertise enabling us the ability to supply full series of High Quality products;

Company Productivity

For OEM compatible sfp transceiver, the factory daily production will be up to 5,000 pcs, for general 1.25G SFP,10G SFP+, 25G SFP28 transceiver module like 500-1000pcs, can ship within 1-3 days;

For brand optical module, we have more than 200,000 original sfp transceivers at inventory for immediate delivery at any one time.