Injection Blow Extrusion Gravimetric Batch Blender Plastics Feeder Automatic​

NAMING PRINCIPLE of Gravimetric Batch Blender

OGB-xxx-xx

① ② ③

① Orste Gravimetric Blender

② Maximum Throughput (kg/hr) (4 Ingredients)

③ Quantity of Hoppers

FEATURES of Gravimetric Batch Blender

• All the materials are mixed after gravimetry for accurate control. The accuracy is ±0.1% when raw material ration is 0.5%~5% (excluding 5%), while the raw material ratio is bigger than 5%, the accuracy changes to ±0.3%.

• Auto calibration after each material weighting ensures accuracy.

• Up to 100 recipes can be stored for future use.

• Alarm log function is standard.

• For OGB-400 and models below, machine mount model is the standard supply (equipped with magnetic base, manual discharge plate).

• For OGB-1000 and models above, floor stand is the standard supply (equipped with movable floor stand, storage hopper and pneumatic discharge valve).

• Has the function of recycled material compensation (recycling hopper is standard equipped with low level switch). Aberration compensation can be automatically calculated based on the feeding amount of recycled materials.

• All models are standard equipped with a second discharge valve to replace the main discharge valve when modular proportion is within 0.5%-5%.

• Adopt Ethernet communication function to centrally monitor the operation connecting with molding machine.

OPTIONS of Gravimetric Batch Blender

Hopper low level sensor can be selected to give alarm when material is insufficient

Floor stand, pneumatic discharge valve, storage bin and suction box can be optionally purchased for floor mounting (Applicable for OGB-600 and models below)

APPLICATION of Gravimetric Batch Blender

OGB Gravimetric Blender is widely applicable in plastic processing field like plastic extrusion, injection molding, bottle blowing. Standard models can process granules like raw material, recycled material, masterbatch and additives. For color powder or color oil, special models can be customized.

FUNCTIONAL SCHEME of Gravimetric Batch Blender

When machine starts working, hopper 1 starts feeding on the basic calculation of set weight and unit time feeding of metering valve. The valve will be closed after feeding time and then gravimetric sensor will starts work. Within the error range, the machine will go to hopper 2, and then in succession hopper 3, until all the hoppers finish feeding. After feeding, materials will fall into the mixing tank and be blended until reaching the time limit. Manually open the shut-off plate or automatically open the pneumatic discharge valve to let the material fall into the injection molding machine or storage tank.

PARAMETERS of Gravimetric Batch Blender

We reserve the right to change parameters without prior notice.

Notes:

(1) Above loading capacity is based on pellet material of 0.65kg/L in bulk density and 3-5mm in diameter.

(2) Power: 3ф, 230/400/460/575VAC, 50/60Hz.

Matters Needing Attention

Electrical installation of the machine should be done by qualified electricians.

Connecting the cooling water (if needed) after the machine is installed in a appointing place, make sure the inlet and outlet water pipe is in good condition.

Before connecting to AC Power Source, turn power switch to OFF position. While AC power source is connected, make sure specifications and overload protection rating of the power switch are suitable and reliable. When the machine is under care or maintenance, turn off both power switch and automatic operation switch.

Dongguan Orste Machinery Equipment Co., Ltd. was established in 2007 in “Made in China” City, Dongguan, Guangdong Province. After many years of growth and development, Orste has become a technology driven and innovative enterprise with independent development ability, integrating design, manufacturing, sales and maintenance.

We have been awarded ISO9001 certification. Orste now owns 1 manufacturing factory in Dongguan and 12 sales agent service centers in many cities in China including Tianjin, Jinan, Suzhou, Shanghai, Wenzhou, Fuzhou, Wuhan, Changsha, Chongqing and etc. With a foothold set in China, we are serving global markets. Orste devotes itself to improving the product quality and working environment in plastic factories by supplying integral automation systems to them.

With many years of experience and accumulation in Dehumidifying and Drying, Material Conveying, Heating and Cooling, Granulating and Recycling, Mixing and Blending, and upholding the principle of “Focusing on Product Details, Pursuing Excellent Quality”, Orste Machinery is an industry leader with its mature technology in peripheral equipment of plastic molding.

Orste’s large scale central material feeding system and cooling water circulation system including three major systems of centralized raw material drying, water temperature control and metering & mixing, are extensively applied in plastic injection molding industry. The main products of the company are a series of high-tech products including Dehumidifying Dryer, Hopper Dryer, Auto-loader, “Three-in-one” Compact Dryers, Water/ Oil Mold Temperature Controller, Industrial Cooling Machine, Granulator, Mixer, Masterbatch Doser and Vibrating Screen.

With the principle of customer satisfaction first, we take value contribution as our responsibility and constantly review the market adaptability of our products to timely seize the latest trend in industry, and maintain the uniqueness and technological edge of products. Through proactive listening, delicate service, modest attitude, Orste Machinery always maintains close contact with its customers.