1.7g/cm3 MDF Powder Coatings Low Curing Temperature No VOC Environmentally Friendly

Low Curing Temperature, No VOC Environmentally Friendly MDF Powder Coatings

◎ Introduction

MDF powder coating is a durable thermosetting coating finish that fully encapsulates the MDF board with excellent mechanical properties and chemical performance.

MDF is medium density fiberboard (medium density fiberboard), medium density fiberboard is a board with a density in the range of 0.50 ~ 0.88g/cm³, which is made of plant fiber as raw material, applied with urea-formaldehyde resin or other synthetic resin, and pressed under heating and pressure conditions, and other suitable additives can also be added to improve sheet properties.

◎ Recommended Application

For MDF furniture and hardware finishes, such as commercial furniture, residential furniture, retail displays, office fitouts, kitchen and bath cabinets, etc.

◎ Advantages

1. There is no water consumption in the production process.

2. The remaining powder coatings in the production process can be recycled.

3. High-strength protective layer, not only high scratch resistance, high wear resistance, but also high moisture resistance.

4. The shape, color and surface texture of MDF create infinite space for design.

5. No volatile organic compounds and formaldehyde, Tianna water, stupid and heavy metals. The closed powder package greatly reduces the formaldehyde emission remaining in the MDF, and the bacteria are not easy to grow.

6. The medium density fiberboard is sterilized by high temperature at 250ºC, and at the same time, it can effectively remove the formaldehyde in the board and meet the EO environmental protection standard.

7. The baking temperature of MDF powder coating is 120ºC. Compared with the baking temperature of conventional powder, which is 200ºC, the baking temperature is greatly reduced, which effectively achieves energy saving and emission reduction, and provides a more comfortable working environment for workshop staff.

◎ Technical Data

◎ Specifications

◎ Coating Reference

Spraying Method: Electrostatic spraying.

Timber Treatment: Polish and clean the surface according to the actual requirement.

Timber Moisture Content: 4%-8%

Pre-heat Temperature: The substrate temperature is about 60ºC

Curing condition: Circulated heating by infrared and hot air. 130ºC ~ 150ºC (surface temperature of the substrate), 5 ~ 20 minutes, according to the production line. Our current client uses the condition at 140ºC/8min.

◎ Notice

It’s suitable for exterior or interior use.

Different kinds of MDF substrates will affect evidently the spraying effect.

The color and appearance would not be affected by spraying thickness.

There are differences between the laboratory sample and the coating plate of the production line, and the spraying parameters need to be adjusted by the customer to meet the requirements.

◎ Transportation and storage

The net weight of carton packaging is 25kg or 20kg.

It is not a hazardous article, so it has no specific transportation requirement.

Store in a dry and cool place below 25ºC.

Shelf Life: 6 months.

◎ Product Show

    Kinte Material Technology Co.,Ltd, affiliated to China National Electric Apparatus Research Institute

(CEI, established in 1958 ), is a state-owned company specializing in R&D, production and sales of

powder coatings, saturated polyester resins, liquid paints and special chemical materials which located

in Huadu District in Kinte Industrial Park with an area of 220,000 m² occupied.

    We have gained ISO9001 and ISO14000, ISO18001, RoHS, UL certification and QUALICOAT Certificate.

Due to the excellent and stable quality, our products always enjoy high reputation at home and oversea, and

were sold to more than 30 countries.

    Polyester resin branch was founded in 2000, now there are two factories (DongGuan factory and TaiXing Factory)

with annual production capacity over 80,000 tons. Our clients include many top-tier powder manufacturers in the world

such as AKZO, PPG, TIGER, PROTECH, NIPPON, OXYPLAST, JOTUN, SHERWIN, VALSPAR, SINTERPLAST etc.

    Powder coating branch was founded in 1992, and now there are two factories (HuaDu factory and WuHan factory)

with annual production capacity over 25,000 tons. And we have cooperated with many famous clients such as Gree,

Pansonic, HITACHI, IKEA, Mitsubishi, Walmart, HUAWEI, EMERSON, Hisence, Dicastal, BYD, AAG etc.

    The company adhere to the quality concept “Quality is the life, providing comprehensively one-stop solution with

technical support and service, which access to customer’s respect and the market reputation. We are within top 3

powder coatings maunfacturers in China. Kinte powder coating was named "Famous brand of Guangdong province"

in 2012.

    Kinte Industrial Park covers an area of 75000 square meters: 16600 square meters of administrative office area,

43400 square meters of factory buildings, 15000 square meters of living supporting facilities such as canteens and

dormitories; Production equipment, office furniture, roads, electricity supply, water supply, drainage, sewage, waste

water treatment, ventilation, communication, broadband network, cable TV and other supporting facilities are perfect.

Aerial View of Kinte Industrial Park, Huadu, Guangzhou

    We unremittingly stick at the business principle of “Quality is the life, adhere to first-class technology, first-class

quality, first-class cost and first-class brand”. We would like to provide a complete set of services and solutions for

both domestic and abroad customers and would like to go forward to brilliant future with you together.