Gold Silver Paperboard Coating Machine With Electric Heating Type

Gold silver paperboard coating machine ZFT1100

Gold silver paperboard coating machine is to laminating, coloring, then driving, cooling, rewind aluminium foil (7-10μ), PET Metalized film (12-38μ), transfer metalized film, transfer laser film with paper (40-250g/㎡). It guaranteed coating face will not be scratched during production

Main technical parameters

1). Applicable coating material: 60g/㎡-250g/㎡ high quality web roll paper / aluminium foil (6-10μ), PET (12-20μ)

PET(12-20μ)

2). Substrate material width: Max.1650mm

3). Maximum machine speed: Max.150m/min

4). Maximum run speed: Max.120m/min

5). Paper unwind diameter: Max.φ1600mm

6). Film unwind diameter: Max.φ600mm

7). Rewind diameter: Max.φ1600mm

8). Paper-core size: paper roll 6 inches, 12 inches; film roll: 3 inches

9). Coating type: directly gravure coating (coloring) three-roller calculate transfer (coating glue)

10). Complete machine power: about 300 kw (driving oven heating power 180KW)

11). Paper unwind motor: 18.5kW

12). Coating glue motor: 5.5kW

13). Stripping motor: 5.5kW

14). Laminating motor: 7.5kW

15). Coloring motor: 7.5kW

16). Traction motor: 7.5Kw x 2 sets

17). Rewind motor: 18.5kW

18). Air inlet motor: 3Kw x 4 sets

19). Air outlet motor: 2.2Kw x 4 sets

20). Other: about 10KW

21). Driving oven heating type: electric heating type (maximum temperature: 120℃)

22). Electric power supply: 380V±10% 50Hz 3 phase 5 cables (including ground cable)

23). Compressed air: pressure 0.7-0.8MPa

Company Information:

SMF Machinery Factory is an integrated professional manufacturer to produce, design and sell Slitting, Rewinding, Laminating, Coating, and CPP or CPE 3 or multiple layers Cast Film machinery facilities with more than 19 years of experiences.

Our company has been developing and moving towards a greater competitive advantage by continuously improving technology and innovation.

All project will be serviced by our expertise in Mechanical Engineer Department, Assembly Department, Electrical Department, Software Programming Department, so we can offer our clients with our top standard machinery, also we can make all kinds of modifications according to customer specific requirements.

Our machineries are sold in many countries including India, Indonesia, Thailand, Vietnam, Brazil, Poland, Korea, Italy, Philippines, Singapore, Russia, Malaysia, Pakistan and so on.

Company Introduction

SMF focus on Innovation Research and Develop Leader Specialize in design and manufacture primary and secondary Slitter & Rewinder machine, CPP/CPE Multi-layer Co-Extrusion Casting Film line and Extrusion Lamiante Coating Machine in China Since 1998.

SMF keep Integrity and pragmatic, keep improving, quality first, customer paramountcy. People-oriented, try our best to do our efforts for the customers' satisfaction, with customers and suppliers adhere to the close cooperation between and close interaction

All project will be serviced by our expertise in Mechanical Engineer Department, Assembly Department, Electrical Department, Software Programming Department, so we can offer our clients with our top standard machinery, also we can make all kinds of modifications according to customer specific requirements. Outstanding end-to-end service support. Reliable assistance – around the globe, at all times.

You Are Currently Facing The Problem?

A. Without professional technicians, do not know how to choose machine?

B. Do not find the right machine structure to match your currently demand?

C. Found the right machine, but do not have suitable or professional operator to run the lines?

D. No reliable machinery factory can provide a good economic solution for machines?

E. The machinery supplier can not cooperate in time or delivery in time?

F. OEM SERVICE OEM

We have offered OEM service since 1998, and we can make the product with customer`s specific requirements, and can custom the packaging for customer.

We Can Provide You

All project will be serviced by our expertise engineer in Mechanical Engineer Department, Assembly Department, Electrical Department, Software Programming Department

We choose the machine structure according to your specific requirements.

We have professional operator dispatch to your esteemed company for training your staff.

We have been served clients all over the world.We offer quotations within 1-3 days and arrange shipment within 90-180 days.

Specialized OEM Services

1. Components

SIMENS, YASKAWA, MITSUBISHI, MITUSHAHI, E+L, JCTIMES, MERO, HIWIN, ABB and so on

2. Color Ivory color, the color is determined by you.

3. Size and shape

According to customer requirement and design drawing for reference

4. LOGO

Metal plate or printing

5. Packaging

Provide adaptation seaworthy packing, spray antirust paint and reinforce when machine loaded container

CUSTOMIZATION SERVICE

The customer inquire about the certain product according to the demand. After receives the inquiry, we will price the product. Then the corresponding quotation will be sent to the customers according to their request.

Customization process

Customization process 1

Determine customer needs by meeting, email or telephone. According to the customer`s needs and bargain, we would offer the solution for customer. Our designer will make drawing according to customer needs, or customer shows us what they need, or choose from our available standard machinery.

Customization process 2

According to the solution of first step, our team will prepare drawing accordingly. It includes technical parameters, and all the solutions of machine.

Customization process 3

When everything ready, and after customer finalized project, our team will start to make according to the drawing. Machine production step as below: - requirements finalized by customer – drawing will be provide to customer for confirmation – Initiate to purchase components – assembly in our workshop – any machine processing will be taken photo to customer checking – trial running in our workshop – inform customer come to our factory for official test running acceptance – preparing for shipment – send all documents to customer by DHL

Customization process 4

Our sales team will take photo, videos during loading container and send to customer checking

Manufacturing process

1. Design

2. Processing

3. Assembly

4. software programming

5. Debugging

6. Shipment

7. Installation

8. After-sale service