Cnc Milling Carbide Insert Rcmx 0803 1003 1204 1606 2006 3209 Alloy Tool Metal Stainless Steel

Quick Detail:

• Good thermal hardness
• Excellent wear resistance
• Sharp and durable
• Smooth chip breaking
• Long service life
• Excellent performance

Description:

• RCMX milling carbide inserts are made of 0.6UM micro particle tungsten steel, which has higher wear resistance and strength. It is made by imported technology, with better performance and longer service life; With 5000 ℃ high temperature sintering, impurities are removed, and 1000 ℃ stress accumulation spraying, the coating is thicker, the processing is more stable, the cutting edge is sharp, the cutting strength is high, and the chip breaking groove edge band is wide, which can reduce the cutting pressure and improve the service life of the blade.

Specifications:​

Lead Time:

Notice:

• The milling carbide inserts shall not be collided or dropped on the ground and must be handled with care.
• Before installing the milling carbide inserts, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the milling carbide inserts are firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the milling carbide inserts are not used, hang the blade vertically on the dry shelf.

Applications:

Our milling carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: