IEC 60950 Clause 2.3.5 Information Technology Equipment 5 Safety Test Generator 130A

IEC 60950 Clause 2.3.5 Information Technology Equipment 5 Safety Test Generator 130A

Product Overview:

The 130A test generator is designed and manufactured according to the requirements of IEC60950 clause 2.3.5.

It can simulate voltage standards (50Hz or 60Hz) in different regions to meet the test requirements. The instrument is designed with a stable signal source and a large and medium power matching circuit to meet the output requirements under large loads.

Input Characteristics:

Technical Index:

Boot Check

Unpacking inspection

The 130A test generator is packed in a carton box. When unpacking the instrument, check the appearance and panel are intact, and check whether the number of instrument accessories in the box is correct. For the list of instrument accessories, see packing list.

Input voltage and fuse specifications

The 130A test generator uses AC220V, 50Hz/60Hz single-phase power supply, and the fuse capacity is 3A. For details, see the technical specifications. Note: Before replacing the fuse, the input power cord must be removed, and the newly replaced fuse must meet the requirements.

Boot check

Before turning on the power of the instrument, make sure that the ground wire of the power supply is connected. This instrument uses a three-core power cord. When the power cord is connected, it must be in good contact, and ensure that the instrument chassis is grounded.

Storage and transportation environment

The instrument can be stored and transported in the following environmental conditions:
Temperature: -20℃～60℃;
Humidity: less than 80% RH.
Note: It is necessary to avoid abrupt changes in ambient temperature, which may cause moisture condensation inside the instrument.

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo  products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment,  automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.