15m Bus Spray Booth Semi - Down Draft Extraction OEM

15m bus spray booth semi-down draft extraction OEM Manufacturing

Technical configuration of Spraying Booth(BZB-FB-1500L)
Dimension	Inner dimension	15000×5000×5000 (L×W×H)
	External dimension	16896×5146×5800 (L×W×H)
Room	Structure	Semi drop type, steel composite beam with steel frame structure as framework and steel stiffeners; The wallboard is vertically embedded. The static pressure chamber is on the top of the operating room. Between the static pressure chamber and the operating room, the top net, guide plate and high-quality filter cotton are paved. The height of the static pressure chamber: 800mm;
	Wall panel	70mm thick double sides δ=0.476mm color steel plate, socket type, width: 1150mm, filling material: EPS;
	Ceiling panel	Single layer with static chamber in front δ-0.8mm high-quality galvanized steel plate by bending; 50mm thick double-sided without static chamber in the rear section δ= Made of 0.476mm color steel plate, socket type, width: 1150mm, filling material: EPS;
	Ventilation	Rear wall exhaust, full drop type, upper supply and lower discharge;
	Edging	δ-1.2mm galvanized steel plate and treated by powder spraying;
Main door	Structure	Manual folding aluminum alloy door with 4 leaves, inside and outside δ= 0.476mm color steel plate, 70mm thick, internal filling: EPS wallboard production, equipped with standard gate tempered glass observation window, size: 550 × 1150mm(W × H)；
	Type	Side entry and exit
	Quantity	Door opening size: 4000 × 4650mm(W × H) , 1 group in total;
Service door	Structure	Aluminum alloy frame structure, tempered glass observation window and pressure lock device are adopted to ensure pressure relief in case of excessive indoor positive pressure,Viewing window glass size: 1000 × 400× 5mm
	Quantity	Door leaf size: 800 × 2000mm(W × H) , quantity: 2 sets in total
Return air cabinet	Structure	Made of profile and steel plate, inside and outside δ= 0.8mm galvanized steel sheet covering, filled with rock wool insulation material in the middle, and sprayed on the surface;
	Quantity	1 pc in total
Air supply system	Cabinet	The frame is welded with 50 molding materials, inside and outside δ= 0.8mm galvanized steel sheet covering, filled with rock wool insulation material in the middle, and sprayed on the surface;
	Fan	YDW series centrifugal fan, model: YDW-5.6M, air volume: 20000m ³/ h. Full pressure: 820pa, power: 7.5kw;
	Driving mode	External rotor centrifugal fan
	Quantity	2 × 7.5 kw per group, 1 sets in total, total air supply volume: 40000m ³/ h,
	Noise	≤85dB
Air Exhaust system	Cabinet	The frame is welded with 50 molding materials, inside and outside δ= 0.8mm galvanized steel sheet covering, filled with rock wool insulation material in the middle, and sprayed on the surface;
	Fan	4-82 series centrifugal fan, model: 4-82-6.3E, air volume: 36037m ³/ h. Total pressure: 1076pa,
	Motor	Power: 15kw, number of poles: 4 poles,
	Driving mode	Pulley drive
	Quantity	15kw for each group, 1 group in total, total exhaust air volume: 36037 m ³/ h,
	Noise	≤85dB
Lighting system	Ceiling light	18 groups × 4 pieces =72 pieces × 18 W, LED tube;
	Installation type	45 ° on both sides
	Bottom light	20 groups × 2 pieces =40 pieces × 18 W, LED tube;
	Installation type	10 groups of left wall and 10 groups of right wall are installed vertically up and down alternately,
	Glass	The lamp is equipped with 4.0mm tempered glass
	Lamp box	Standard
	Specification	Illumination ≥ 800Lux; Total power: 2016w
Filtration system	Air-inlet filter	G3 primary filtration, filtering out 10μm Dust above
	Ceiling filter	F5 filter cotton B to b-560g,can filter out 5μm Dust above
	Air-return filter	Glass fiber filter cotton
	Exhaust gas treatment	Activated carbon filtration
Duct	Material	Air duct adopts δ= 0.8 the galvanized sheet shall be bent and fabricated, and both ends shall be equipped with die flange connection
	Quantity	Straight pipe: 5 sections, 90 ° elbow: 1pc, 45 ° elbow: 1pcs, manual regulating damper: 1pcs, air inlet is equipped with manual regulating damper;
	Remark	Air supply pipe with rock wool insulation pipe
Heating system	Heating type	Fuel burning machine + heat exchanger
	Heat exchange furnace liner	1Gr18Ni9Ti stainless steel (SUS304) is used, δ= 1.5mm, made of double-layer heat exchange stainless steel pipe; Enlarged and lengthened furnace liner
	Burner	Rl34 Italian riyalu fuel burning machine heating, calorific value of burning machine: 340000 kcal/h;
	Change over damper	The pneumatic damper performs internal and external circulation conversion,
	Quantity	1 set in total, maximum calorific value: 5340000 kcal/h;
	Chimney	Equipped with 5 straight pipes and 2 elbows, δ= Fabrication of 0.8mm galvanized sheet,
Electric 3D Lift(Optional)	Lifting height		500-3500㎜		Lateral expansion			900-1200㎜
	Longitudinal stroke		13000㎜		Power			3KW/set
	Quantity				2 pcs / set (1 set for each side), 1 set in total
Electric control system	Material	Knob control, main components are Schneider brand;
	Control system	Standard direct startup is adopted for air supply, and standardstep-down startup control system is adopted for air exhaust
	Function	Painting, temperature rise painting, paint baking, lighting, emergency stop switch, fault alarm, accumulative time, temperature limiter, paint baking delay stop protection, motor overload and overcurrent protection, fan and heating system interlocking, etc.
	Special specification
Voltage	380V,50HZ,3P			Maximum temperature			80℃
Wind speed	0.44m/s			Rated total power			34KW
Color	Optional: white, blue
Others

This is Customer-made Industry Spray Booth base on customer's require.Workshop space.
Produce Capacity.Contact us if you have require.we can design to full fill your require.
The follow Project is in Dandong ( A very big State-owned enterprise made Airports
and bridges project)





Some of our Project.

----------------------------------------FAQs-----------------------------------------

Are you Trade company or manufacturer?

We are the manufacturer with export liscence.We have two factory in Guangzhou and in Jiangsu,China.

How can we cooperation?

How can we cooperation?
1. Turn Key Project:
Our company will be responsible to help you to do the production line desing,manufacturing,installation,
debugging and your personnel trainging jobs,Also we will provide you one-stop service for your
production facilities procurement.
2. Equipment Supply:
Our company will not only provide you the equipments,but also will offer you the onsite installation
instruction and guidance as well.
How about after sale serivce?

1. Provide technical support and production line upgrade
2. Feedback withini 12h after receive fault notification or service requirement
3. Free training on the user’s manual
4. User-friendly English manual or operation video for machine using and maintanence.
5. One Year Gruantee.

Guangdong Jingzhongjing Industrial Painting Equipment Co., Ltd belong to JingzhongJing(JZJ) Group

company was set up in 1999, now is a large comprehensive company which specialies in the design,

manufacture,Sales, service for Pre-treatment, Painting lines, Exhaust Gas treatment equipments and other

New design productfor military-civilian dual-use equipment ect.

Spray booth/Preparation room/Water testing line for Car/Bus/Truck/Train/Boat/aircraft ect; Sand Blasting

Room/Shot Blasting Room/Power Coating/Painting line, Exhaust gas(Vocs treatment equipment for all kind

of Industry Product, foldable field camping cabin and intelligent disinfection Channel ect.



Baozhongbao(BZB) Jingzhongjing(JZJ)



1) Guangdong Jingzhongjing Industrial Painting Equipment Co., Ltd (In Guangzhou, Since 1999), which

Cover 30, 000 M2, with 218 staff, Main Product: Spray booth and preparation room for Auto/Bus/Truck/Boat

/Aircraft and all different industry, Auto sheet-metal line, Water Test line. Power coating line, focus on the

producing for oversea market and the annual output up to 1500 sets equipments.

2) Jiangsu Jingzhongjing Industrial Painting Equipment Co., Ltd (Jiangsu, Since 2007), which Cover 120, 000 M2,

with 328staff, Main Product: Shoting blasting, Degrease metal pre-treament, Different king of large Painting line.

UV light, RCO, RTO, Voc environmental protection equipment, foldable field camping cabin and intelligent disinfection

Channel. Focus on the producing for big project and new product development, the annual output up to 2000 sets

equipments.

Guangzhou Shinely Import and Export Trade Co., Ltd, which was set up in 2013. Shinely is the official trade

branch of Jingzhongjing Group and 100% belong to Jingzhongjing Group. Now Shinely have more than 30

staff, including sales team, technical team, financial team, Oversea installation and after service team.

Except sale our own product,We also provide quality services for integrating the export of other products.



We are the Biggest authorised Equipment Supplier of 36 Car brands 4S Shop in China, such as Volkswagen,

Audi,Mazda, Citroen, Peugeot, Honda, Toyota, BWB, Ford and Nissan ect. We also export to more than 80

coutries all over the world, such as the USA, Japan, Russia, Australia, Canada, Germany, Korea, Thailand,

Malaysia, Singapore, Vietnam, Pakistan, UEA ect.

Combining advanced technology, high-quality components and excellent support, JingzhongJing(JZG) Group

provides industry-leading spray booths and finishing equipment for a wide variety of industries - including

aerospace,automotive refinish and industrial manufacturing. Our spray booths and finishing equipment are

expertly designed for superior performance and longevity.

With the development of the company, the technology research and development capabilities continue to

improve,our company continues to maintain the development and manufacture of related products to meet

market require.