358 anti-climb fence 3" X 0.5" X 8 Gauge Wire(12.7mm X 76.20mm Wire) with the V fold

The 358 anti-climb fence is designed to provide a very high level of security that is almost impossible to climb, with the narrow apertures of the mesh preventing any intruder gaining a foothold, whilst retaining a good level of visibility and an aesthetically pleasing appearance. This system is used extensively by the Ministry of Defence around high security sites.

Detailed Images

>>Weld strength is 75% of the minimum tensile strength of the wire (tensile range 540-690 N/m²).
>>this system combines an anti climb and anti cut fence with excellent through visibility and resistance to vandalism.
>>Extra length panels can be supplied for burying 300mm below ground to prevent burrowing.

>>An adhesion coating is applied to allow perfect adhesion with the polyester coating (min. 100 micron).
>>Posts are polyester coated with a galvanized substrate in accordance with Euro norm 10147.

inquiry us>>>

Panel packing:

<1>Plastic film at the bottom to avoid the panel be destroyed
<2>4 metal corners to ensure the panel strong and uniform
<3>wood plate at the top of pallet to keep the under panel

<4>pallet tube size:40*80mm tubes at the botom vertical position

Fence post packing:
<1>plastic cap cover onto the post
<2>plastic film +metal pallet for fence pot

Accessories packing:
<1>stainless steel nuts and screws install with clips
<2>5 sets clips load into one plastic bag
<3>12 bags into one carton box