R410A 18000 Btu Inverter Air Conditioner Air Cooling 50hz 220V

R410A 18000 Btu Inverter Air Conditioner Air Cooling 50hz 220V

VA Panel 50hz 220V R410A On-Off 18000BTU Cooling High Quality AC Units Mounted Cabinet Air Cooling Free Spare Parts

Dehumidification

The air conditioner is accompanied by dehumidification during the refrigeration process. The relative humidity of the environment that people feel comfortable should be around 40-60%. When the relative humidity is too high, such as above 90%, even if the temperature is within a comfortable range, people still feel bad.

Purifying air

The air contains a certain amount of harmful gases such as NH3, SO2, etc., as well as various odors such as sweat, body odor and bathroom odor.

① The startup of the inverter air conditioner is a soft start, no inrush current, and no waste of electricity.

② When the inverter air conditioner is in operation, the high frequency operation temperature rises first. When the room temperature reaches the set temperature of the air conditioner, the air conditioner becomes low frequency operation and keeps warm without shutting down. The power consumption of continuous low-frequency operation is only one-third or even one-fourth of the rated power. The same goes for refrigeration.

③ Inverter air conditioners do not have electric auxiliary heating elements that consume a lot of electricity.

To sum up, the continuous low-frequency operation of inverter air conditioners has neither frequent start-up inrush current nor long-term high-power operation like fixed-speed air conditioners, and there is no electric auxiliary heating element that consumes electricity. Therefore, inverter air conditioners are better than fixed-speed air conditioners. Speed air-conditioning saves energy and electricity.

In 2015, Yuetu moved to Ninghua from Wenzhou, and covering an area with 300,000 square meter. There are total 12 production lines with 3 million sets production capacity annually and 95% of the parts self produced, such as heat exchanger, welding, bending, automatic coating, plastic injection, and so on.