Desander API Drilling Mud Process 6- 12 Inch Polyurethane Hydrocyclone Customized

Drilling fluids desander information

Drilling fluids desander for different mud systems. Which is the 2nd phase solids control equipment in the whole mud system. But for different mud systems, the desander configuration varies from each other.

Drilling fluids desander technical parameters

The desanders cone are sized from 6″ to 12″ for the drilling mud process. The most popular one is 10″. And cones are made of high-quality polyurethane since the high ability to resist abrasion. According to different flow rate demands, the desander will be configured with different numbers of cones.

The drilling fluids are pumped from the shaker tank by a centrifugal pump. Under the pressure and gravity effect, there will be a swirl in a cone. Then the centrifugal force pushes heavier material down to cone drop in Apex and light fluids flow out of the discharge line upside.

Main Features of Our Drilling Desander

Pure polyurethane or high-chromium for hydrocyclones.
Clamp connection for hydrocyclones installation, easy to dismantle and replace.
Replaceable hydrocyclones.
Internation brand vibrating motor, Martin or Oli Motor.
Compact design with a small footprint.
Flexible options for 1, 2, or 3 pieces of 10" or 12" cones for different capacities.
Flexible fast connections are available for user assembly.

How many different desander for drilling mud systems?

Besides oil drilling mud desander, there is desander used in the mud recycling systems. Such as HDD or piling, slurry separation or tunneling, and so on

Different use will request different size cones. Such as for piling, they may request a 14″ or larger cone. For HDD, especially for the smaller rigs, the system may request 6” or just desilter instead of desander

And even for the same use, there will be different configurations according to capacity. For example, ZJ40 may request a mud system circulation rate of around 200m³/h, while ZJ70 may request 360m³/h. So, the shakers, drilling fluids desander and other equipment holding the same flow rate will be configured in the system accordingly

Mud desander options

1. 3 in 1 option: shale shaker, desander cyclone, and desilter cyclone make the whole equipment to be a 3 in 1. Desander cyclone works to separate solids 47-76 micron solids and desilter cyclone works to separate solids 15-25 micron solids. The separated solids will drop onto shale shaker screen which set on bottom to dry solids product by recycle drilling fluids back into mud tank. The 3 in 1 option is a popular option to minim footprint and maximize its performance result.

2. 2 in 1 option: shale shaker with desander cyclone make a whole 2 in 1 equipment only to separate solids 47-76 micron solids out and bottom shaker to dry solids discharge to minimum drilling fluids lost. This option will maximize its performance application by a big shale shaker but maximize its footprint too. Some clients will choose a mini shaker to make this option cost-effective.

3. Desander cyclone only to a minimum its cost, the solids separated from desander cyclone will be discharged directly by a collection hopper which will make more drilling fluids lost.

4. It’s hart to say which option is better only on specification, it will be depends on drilling condition, drilling mud requirement, budget requirement, etc. The most suitable option is the best option for clients.

Please check the above technical specifications for your reference. And some configuration is customizable. For any questions or demands, just feel free to contact AIPU solids. You will get a professional proposal very soon.

AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system.

All items can be used in oil and gas drilling, the oil sludge treatment, the HDD mud recycling, the civil construction micro tunnelling, the piling and so on. The main equipment inlcuding solids control system, shale shaker, mud cleaner, centrifgue decanter, degassers, agitator, mud gun, centrifugal pumps, mud tank, cuttings dryer, the mud cooling system and so on.

Pleased to say AIPU products have been delivered to many regions and conturies around the world. Including Germany, Russia, USA, UK, Kuwait,  UAE, India, Indonesia, Malaysia, Singapore, Taiwan, and so on.

Our hot sales product Hunter series shale shaker is rather popular with all of our clients. The Hunter-MG and Hunter-D shale shakers can be configured as linear motion, BEM or the dual motion. For the decks, they can be double deck. For the base, they can be dual tandem or triple tandem

Another hot sales products Hunter seires mud cleaner is maintained all the good features of Hunter series shaker. And the hydrocylones are all made of high quality polyurethane. Another feature is the cones are interchangeable with famous brand ones.

Besides the shale shaker and mud cleaner, there are centrifugal pumps, mud agitators and so on equipment appreciated by our clients. New innovated mud cooling system for land oil drilling is a patented products used in SINOPEC drilling site. The performance surprised end users.

Why clients select AIPU?

It's because of high qualty and the reasonable cost happened during our cooperation. We are professional on solids control, mud process, sludge treatment. Among all the orders there are over 80% orders are repeat orders from our regular clients or recommned by them

Are you in the demand of solids control or other mud treatment-related items now? Please come to us freely. Trust you will be surprised by AIPU products and servcies. All the solutions will be optimal and soonest one.