Huawei Fusion Server 5288 V3 4U rack server with Intel Xeon Processors

Specifications

Fusion Server 5288 V3

Processors

One or two Intel Xeon E5-2600 v3 series processors

Memory

16 DDR4 RDIMMs/LRDIMMs

Internal Storage

Hard disk configurations:
16 x front 3.5-inch SAS/SATA HDDs
14 x 3.5-inch SAS or SATA HDDs + 2 x 2.5-inch SSDs, SAS, or SATA HDDs
12 x 3.5-inch SAS or SATA HDDs + 4 x 2.5-inch SSDs, SAS, or SATA HDDs
5288 V3 with 28 hard disks
Front
24 x 3.5-inch SAS or SATA HDDs
Rear:
4 x 3.5-inch SAS or SATA HDDs
2 x 3.5-inch SAS or SATA HDDs + 2 x 2.5-inch SSDs, SAS, or SATA HDDs
4 x 2.5-inch SSDs, SAS, or SATA HDDs

RAID Support

RAID 0, 1, 10, 5, 50, 6, or 60
Optional supercapacitor
RAID state migration, configuration memory, self-diagnosis, and web-based remote configuration

LOM Network Ports

Two GE electrical ports, supporting Network Controller Sideband Interface (NC-SI), WOL, and PXE
Four GE electrical ports, supporting NC-SI, WOL, and PXE
Two 10 GE optical ports, supporting NC-SI and PXE
Two 10 GE electrical ports, supporting NC-SI, WOL, and PXE

PCIe Expansion

Up to 6 PCIe 3.0 slots

Fan Modules

Hot-swappable fan modules in N+1 redundancy mode

PSUs

2 hot-swappable PSUs in 1+1 redundancy mode

Management

Uses the Huawei Hi1710 management chip and independent ports, supports standard management interfaces, such as SNMP and IPMI, provides the GUI, remote KVM, virtual media, SOL, Predictive Failure Analysis (PFA), intelligent power supply, remote control, and hardware monitoring, all integrated in a touch LCD diagnosis panel
Supports Huawei eSight management software and integration with third-party management systems, such as VMware vCenter, Microsoft SystemCenter, and Nagios

Operating Temperature

41ºF to 104ºF (5ºC to 40ºC)