ISO DIN ANSI Surface Roughness Gauge JIS DSP Chip Control OLED 22 Parameters Ra

MAIN FEATURE

1. Mechatronics and ergonomics design, small size, light weight, easy to operation
2. The stylus drive unit can be stored within the main unit for standard measurement, or separated from the display unit by using the supplied cable which allows more flexible measurement in any orientation. The driver can be separated and reattached in one simple step.
3. DSP chip control and data processing, high speed, low power consumption
4. 22 Parameters: Ra ,Rz, Rq, Rt, Rp ,Rv, R3z, R3y, Rz(JIS), Rs, Rsk, Rsm, Rku, Rmr, Ry(JIS), Rmax,RPc, Rk, Rpk, Rvk, Mr1, Mr2
5. Measurement range up to 160μm (can be optional to 320μm)
6. 4 inches OLED screen, wide viewing angle, excellent readability display.
7. Can be operated using buttons and has menu.
8. It provide Bluetooth Capability, support wireless connection with mobile and mini printer.
9. Built-in lithium-ion rechargeable battery and control circuit, high capacity, no memory effect, it works over 55 hours while fully charged, and there is remaining charge indicator, charging hint
10. Large capacity data storage, 100 item of raw data and curves can be stored
11. Real-time clock setting and display for easy data recording and storage
12. With auto sleep, auto power off, power-saving features
13. Reliable circuit and software design to preventing the motor stuck
14. Language: English
15. All parameters or any of the parameters which set by users can be printed
16. Optional accessories: Bluetooth capability, curved sensor, pinholes sensors, measurement, stand, extension rod, printer
17. Portable Surface Roughness Tester complies with international standards ISO, DIN, ANSI, JIS
18. 8 types of different probes optional, can make the sensor as customers parts test needs ,like our TS11X ,Can test the narrow deep hole

TECHNICAL DATA

STANDARD DELIVERY

Optional accessories:
Sensor for curve/concave/groove surface, hole sensor, measuring platform, extension rod, calibration plate.

TS100 - Standard Sensor, to measure most of the plane, inclined plane, cone surface, inner hole, groove and other surface roughness, in addition to the standard sensor, other special sensors are needed to measure the measuring

platform.

TS110 - Curved Surface Sensor, to measure smooth cylindrical surface which radius is larger than 3mm, for the large radius smooth spherical surface and other surface also can obtain good approximation, need to work with platform

TA1520 or TA1620.

TS90 - Right Angle Rod, change the position of the sensor, mostly use for measure surface of particular groove.

TS55 - Extending Rod, extending rod increases the depth for pickup to enter the

part. Length of extending rod is 50mm.

TS120 - Small hole Sensor, to measure the inner surfaces of holes with radius more than 2mm, better to work with platform TA1520 or TA1620.

TS130- pick up for deep hole Radius for needle point: 5μm Angle for needle: 90° Force for needle: 4mN Measuring range: 400μm Min. width of hole: ø2mm Max. depth of hole: 20mm

TS131 - Deep Groove Sensor, measure groove with width wider than 3mm and depth deeper than 10mm, or the surface roughness of step with height less than 10mm, also can used to measure the planar, cylindrical used with platform, betterto work with platform TA1520 or TA1620.