Ubiquiti Compatible 10G SFP+ Optical Transceiver SR 850nm 300m Multi Mode

Ubiquiti Compatible 10G SFP+ Optical Transceiver SR 850nm 300m Multi Mode

Ubiquiti UF-MM-10G Compatible 10GBASE-SR SFP+ 850nm 300m Transceiver

Olinkcom's Ubiquiti UF-MM-10G compatible SFP+ SR module is suitable for use with Ubiquiti 10G network equipment. It supports data-rate of 10.3125Gbps (10GBASE-SR) or 9.953Gbps (10GBASE-SW) over multi-mode fiber cable. The module is programmed to work with Ubiquiti Switches, Routers, Network Interface Cards (NICs) and Ethernet Media Converters.

Product Features

1. Hot-pluggable SFP+ footprint

2. Up to 300m on 50/125um MMF (2000MHZ km)

3. Compliant with SFP+ MSA with LC connector

4. Single 3.3V power supply

5. Case operating temperature range: Commercial: 0°C to +70°C, Industrial: -40-85°C

Electrical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured at 10.3125b/s with PRBS 2^{31 – 1} NRZ test pattern.

2. 20%~80%

3.Under the ER worst case=4.5@ 10.3125 Gb/s with PRBS 2^{31 - 1} NRZ test pattern for BER < 1x10^-12

APPLICATIONS

● 10GBASE-SR/SW

● 10G Ethernet

● 10G Fiber Channel

FAQ

1. How about the warranty ?

All of our products are 3 years warranty (The return and change service within 1 year, repair within 2 years)

2. What is your transport method?

Depend on client's choice (Such as UPS,Fedex,TNT or DHL)

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.