5 Core Pe Xlpe Insulated Electrical Power Cable 25 Mm2

Other power cables

Cross-linked polyethylene or PVC insulation, PVC or polyethylene outer sheath, STA armored or non-armoured power cables/cables copper core power cables

Type: VV, YJV, VV22, YJV22, VV23, YJV23, NH-VV2 2

Number of cores: single core, 2 cores, 3 cores, 4 cores, 5 cores

Production range: 1.5mm2, 2.5mm2, 4mm2, 6mm, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 204mm2, 3504mm2 ,630mm2

Relevant voltage: 300/300v, 300/500v, 450/750v, 0.6/1kV

Applications

This product is suitable for the transmission and distribution of electricity under AC rated voltage 0.6/1kv , operating frequency 50Hz lines.

Low voltage power cables are used for transmission and distribution of power in 1kV transmission and distribution systems. Widely used in electric power, mining, construction, metallurgy, petrochemical, communications and other fields, completely replace the oil-impregnated paper insulated power cable.

Cross-linked polyethylene insulated power cables Cross-linked polyethylene insulated power cables have many advantages over paper-insulated and PVC-insulated cables. Cross-linked polyethylene cable has the advantages of high electrical strength, mechanical strength, high ageing resistance, environmental stress resistance, chemical corrosion resistance, simple construction, ease of use and high long-term working temperature. It can be laid without descent restrictions.

Advantages of cross-linked polyethylene cables

cross-linked polyethylene cables have a higher long-term operating temperature and a higher current rating. Under the same environmental conditions, cross-linked polyethylene cables can be reduced in size by 1 or 2 steps (normal cross-section) compared to PVC cables. These not only improve the quality and performance of the product, but also reduce the cost of producing the cable. Armoured cables