Bidirectional 45ft Carbon Fiber Telescopic Pole 3K Twill For Mast Flag

High Durability Carbon Fiber Telescopic Pole Tubes Rods for Mast Flag Pole

LIJIN builds on our wide range of composite tubes to produce telescoping poles suitable for a wide range of applications, from carbon fiber window washing solutions to telescoping poles for olive picking, we work with you to determine the best choice of materials and secondary processing (such as printing, assemblies, threading, or even just pre-drilling holes for your final assembly).

Roll Wrapped Tubes

Roll wrapped prepreg carbon fiber tubes are constructed using multiple wraps of twill and/or unidirectional fabrics. Rolled tubes are ideal for applications that require the highest bending stiffness and lowest weight, such as automation, robotics, telescoping poles, idler rollers, and UAV components. The standard finish is cello-wrapped gloss, but a smooth sanded finish is also available. We use a roll wrapping process for smaller, shorter tubes. Roll-wrapping is primarily used for producing small to medium diameter tubes of shorter lengths like 1 meter to 1.5 meters, Roll-wrapping is typically the most economical process for smaller quantity production runs.

Also, We manufacture high-strength, low-weight carbon fiber tubes in various diameters. Our tubes are filament wounds for optimum fiber placement, to get the best performance. These tubes can be fabricated and assembled. Operations such as bonding, drilling, and precision cutting are also available.

Features:

• Lightweight: When you need to use a tool daily, any weight savings are not only noticeable but appreciated.
• Durable: Fiberglass and carbon fiber are both very durable materials. Both strong and stiff, they are resistant to corrosion and will not rust or rot.
• Consistent quality, volume production: Our expertise with pultrusion and pull-winding manufacturing are seen in the repeated quality of the delivered products.

Perfect for:
- Cleaning.
- Pruning
- Fumigation.
- Filming (image and sound).
- Advertising.
- Probes
- Etc.

Main Products:

CNC carbon fiber sheet and CNC carbon fiber tube, include CNC cutting, chamfer, drill hole, countersinking.
3K full carbon fiber sheet, 3K full carbon fiber tube, with twill weave matte surface, twill weave glossy surface, plain weave matte surface, and plain weave glossy surface.
Pultruded carbon fiber components include tube, square tube, and rod.
Fiberglass tube, with black or color surface.

Detailed Size:

CHARACTERISTICS:
• Extended total length: 5000mm. (Tolerance ± 10mm.)
• Total length collected: 1360mm. (Tolerance ± 10mm.)
• Outside diameter of the larger tube: 31mm. (Tolerance ± 0.2mm.)
• Wall of the tubes: 1mm. (Tolerance ± 0.2mm.)
• Total weight: 812gr. (Tolerance ± 50gr.)
• Fiber: carbon 3K 200 gr / m2 Fabric Twill 2x2 (Twill)
• Resin: Epoxy
• Orientation of the fibers: Bidirectional

Strong Clamps

CFR Nylon Injection moulded and Aluminum 7075 metal fitting

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.