| Sign In | Join Free | My futurenowinc.com |
|
| Sign In | Join Free | My futurenowinc.com |
|
| Categories | VFD Spare Parts |
|---|---|
| Brand Name: | CHIFON |
| Model Number: | PG2 |
| Certification: | CE, ISO9001, SGS, EAC |
| Place of Origin: | CHINA |
| MOQ: | 1pcs |
| Payment Terms: | L/C, T/T, Paypal |
| Supply Ability: | 10000pcs per month |
| Delivery Time: | sample order 2 working days, bulk order 7-10 working days |
| Packaging Details: | Wooden case |
| Type:: | Incremental encoder PG card |
| Model: | PG2 |
| Application: | Incremental encoder |
| Number of Phase: | three phases |
| Frequency: | 50/60Hz |
| Applicable Industries:: | Manufacturing Plant, Other |
| Quality Certificate: | CE,ISO,SGS,EAC |
| Warranty: | 18 months |
| Customized: | Yes |
| Company Info. |
| CHIFON ELECTRIC CO.,LIMITED |
| View Contact Details |
| Product List |
Closed-loop Vector Control Frequency Inverter AC Drive With PG Card
►Products Overview
This product is suitable for FPR500A, FPR500E series inverters equipped with asynchronous motors, or synchronous motors equipped with ABZ incremental encoder.
A. Technical specifications
Input power: 24V/200mA (provided by the control board)
Output power: 5V/200mA or 15V/100mA
Installation environment: indoor, no dust, corrosive gas, combustible gas, oil, water vapor, etc.
Ambient temperature: -10°C ~ +50°C
Environmental humidity: less than 95%RH, no condensation
Vibration: less than 0.6G
B. Terminal function
| Definition | Function instruction |
| A+ | Encoder input differential signal A |
| A- | |
| B+ | Encoder input differential signal B |
| B- | |
| Z+ | Encoder input differential signal Z |
| Z- | |
| VCC | Output power supply |
| GND | Output power supply |
| PE | Ground terminal |
Output power jumper wire selection: through the transformation of
JP1, select the VCC output voltage as 5V or 15V
3. Installation and wiring:
Differential output encoder wiring method: connect the signal line and power line correspondingly, pay attention to the work voltage of the encoder.
Wiring method of open-drain NPN output encoder: signal wire ABZ is connected to A-, B- and Z- correspondingly.
4. Debugging method After installation and wiring, select the correct working voltage according to the parameters on the encoder nameplate (VCC output 5V Or 15V).
After the inverter is powered on, set the parameters for debugging as follows:
1. Modify the F0-01 control mode to 1 (with PG vector control).
2. Modify the number of encoder lines F1-27 (there are instructions on the encoder).
3. When the motor is no-load, select parameter auto-tuning F1-37 option 2 to start motor parameter auto-tuning.
5. EMC Guidance
The shielding layer is connected to the ground terminal (PE terminal) of the inverter. 4. For some large-scale equipment, the inverter is far away from the motor, and the motor cable length is greater than 10 meters.
The grounding effect will be worse due to the influence of inductance. In this case, the shielding layer of the encoder can be disconnected from the grounding terminal of the inverter.
|
Indoor Three Phase VFD Line Reactor VFD Input Choke Lightweight EAC
50/60Hz 3 Phase Input AC Reactor VFD Line Choke Power Distribution Equipment
AC Drive VFD Spare Parts Aluminum Encased Wire Wound VFD Braking Resistor
Aluminum Housing VFD Spare Parts Wire Wound Recharge RX24 Resistor For 1.5kw Inverter
125A VFD Spare Parts AC Output Reactor 45kw Three Phases RACL 2%
CE VFD EMC Filter / EMC Input Filter 5A For 0.75kw 1.5kw Inverter
Aluminum Housing Dynamic Wirewound Inverter Braking Resistor 1200W-6000W
ROHS RXG20 VFD Spare Parts Power Pinned Wire Wound Resistors 15W-10000W
3 Phase AC Input Reactor Input Line Reactor Matching With VFD Motor 3.7kw 5HP
Mini VFD Spare Parts AC Variable Frequency Drive VFD Inverter Keypad
