High Accuracy GPS Land Measuring Instrument For Agriculture Farm

High Accuracy Agriculture Farm Land Measuring Machine GPS Land Measuring Instrument

Main Features and Benefits:

It measures the length, width and area of the farm through satellites, and also has the function of unit price set and fare calculating.

The product has been widely used in many agricultural activities for its creative handheld design and high performance and price ratio.

Function:

various terrain areas measurement,distance measurement,land price calculation,Longitude and latitude measurements,altitude measurement.etc.

Application scene:

Agricultural Machinery Operation,field seeding fertilizer&medicine calculation,field survey.etc.

Support:

voice broadcast,real time graphic display,data importer to computer.etc.

Product Parameters of Handheld GPS Survey Equipment:

GPS Machine Interface Display:

The Function of Lofting:

Four Patterns:

1. (Select Points) Select existing navigation points as lofting points.

2. (Equal Division) Setting the number of lofting points,generate equal distance lofting points automatically.

3.(Equal Distance) Setting the distance,generate lofting points automatically.

4. (User-defined Distance) Setting the distance of the single segment,generate lofting points.

Measuring of GNSS GPS Survey Equipment:

First, press up and down button to choose a measuring mode;

1. Normal mode : at the starting point, press [Start/Stop] button to measure in the main surface; return to the starting point in a circle around the

ground, press the [Start/Stop] button to pause the measurement data. Press the power button to end measurement and save data.

2. Circle Machine Load :First, set Circle value number in Parameter setting. And put this equipment in the car from a position which is the nearest

to the edge. Press [Start/Stop] button to start measuring while working.Press [Start] to go on when it’s not finished. Press the power button to end

measurement and save data.

3. Fixed Width Mode : First, set width number in Parameter setting. And press [Start/Stop] button to start measuring at the starting point. Walk to

the under line then press [Start/Stop] button to pause and check the data; press the power button to end measurement and save data.

4. Fixed pointed Mode : at the starting, press [Start/Stop] button to start measurement, then press [enter] button to make one corner point; then

walk along the edge to the next corner, and press [enter] button at every corner to collect information of each corner. At last, press the [Start/Stop]

button to view the measurement data; press the power button to end measurement and save data.

5. L/W mode : at the starting point , press the [Start/Stop] button to measure,and press the [enter] button to save information; Going from point to

another point, press the [enter] button to save information; then going from this point to the finial point, press the [enter] button to save

information; at last, press the [Start/Stop] button to view the measurement data; press the power button to end measurement and save data.

6. Round-trip Machine Load : In this mode, you could measure the area while the farm machine’s working. First, set the value number in

Parameter Round-trip setting. Then press [Start/Stop] button to start measuring while working. Press [Start/Stop] button to check when working is

done. Press [Start] to go on when it’s not finished. Press the power button to end measurement and save data.

7. Normal distance Mode : In this mode you can do distance measurement, at the starting point, press the [Start/Stop] button to start measuring.

And walk along the measuring line to the final point. Press the [Start/Stop] button when you reach the final, press the power button to end

measurement and save data.

8. MultiPoint Mode : In this mode you can do distance measurement that fits all kinds of flat terrain. At the beginning, press [enter] button to save

starting point, walk to the next point and press [enter] to save this point; press the power button to end measurement and save data.

Chengdu Wanggan Technology Co., Ltd. was founded in Oct.11,2017 and is located in No. 879, Ganghua Road, Hongguang Town, Pidu District, Chengdu. We have a plant area of more than 800 square meters and has abundant financial resources. We are specialized in the field of embedded computer ,global positioning system (GNSS) ,and measuring industry for many years, especially has rich experience in the tools measurement(GPS land meter, GPS survey equipment), GPS positioning tracker and consumer electronics industry. Our main products include measuring tools, GPS locators, and smart watches etc. In addition, our products are sold to all cities and provinces around China, which also exported to clients in such countries and regions as South Africa, Southeast Asia and South America etc. We also welcome products OEM orders, logo print,package or manual instruction customization etc. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk freely to our customer service center about your sourcing requirements. Besides, we are making great efforts to develop new products to meet different requirements. Our company has quality control equipment to strictly control the product quality. Adhering to the business principle of mutual benefits, we have a good reputation among our customers because of our perfect services, quality products and competitive prices. We warmly welcome customers from at home and abroad to cooperate with us for common success.