1/8in CF8 CF8M Steel Tube Cap Thread Connection ASTM A351 Metal Pipe Cap

1/8” CF8 / CF8M Cap Thread Connection ASTM A351 Casting Fitting

Model: Elbow,Tees,Socket, Hex nipple, Square plug, Bushing, Union, Hose nipple, Reducing socket, Cross, Street elbow, Round/Hex cap, Reducing elbow, Reducing tee, Half nipple, Reducing hex nipple, Coupling, Reducing Coupling, Barrel Nipple.....

Thread: NPT, NPSC, BSPP, BSPT etc

The Application of casting fitting, cap:

Suitable for water, gas, air, oil, steam pipe system.

Package: Wooden case

Inspection: Dimension inspection, thread inspection, material inspection and non-destructive inspection

Casting Fitting Cap:

Caps, usually liquid- or gas-tight, cover the otherwise open end of a pipe. A cap attaches to the exterior of a pipe, and may have a solvent-weld socket end or a female-threaded interior. The exterior of an industrial cap may be round, square, rectangular, U- or I-shaped, or may have a handgrip. If a solvent-weld cap is used to provide for a future connection point, several inches of pipe must be left before the cap; when the cap is cut off for the future connection, enough pipe must remain to allow a new fitting to be glued onto it.

Who MTSCO is?

MTSCO established in 2006, during many years’ development, now becomes a large and professional industrial piping system provider, serving stainless steel customers from more than 100 countries and regions.

What products can MTSCO provide?

What materials can MTSCO provide?

Austenitic: 304/L/H/N,316/L/H/N/Ti,321/H,309/H,310S,347/H,317/L904L

Duplex steel: 31803,32205,32750,32760

Nickel Alloy:

UNS N10001, N10665, N10675, N06455, N06022, N10276, N06200, N06035, N06030, N06635, N10003, N06002, R30188, N06230, R30556

UNS N06600, N06601, N06617, N06625, N07718, N07750, N08800, N08810, N08811, N08825, N09925, N08926

UNS N04400, N05500

Precipitation-hardening Steels: 254SMO/S31254, 17-4PH, 17-7PH, 15-7PH

Nickel: N4/UNS N02201, N6/UNS N02200

How can MTSCO service customers?

MTSCO's ISO9001 Quality System is issued by TUV. Our full and professional inspection reports contain two parts, one is self-inspection of the requirements beyond ISO9001, which is 100% inspected by our own QC; another is 100% inspected by professional QC teams.

For more information, you are welcome to contact us by email. Thank you for your interest.

VR Visit of Manufacturer

Click the PIC to visit our factory

Who we are?

MTSCO established in 2006, during many years’ development, now becomes a large and professional industrial piping system provider, serving customers from more than 100 countries and regions.