Sign In | Join Free | My futurenowinc.com
futurenowinc.com
Products
 Search by Category
Home > LED Encapsulation Series >

Blue No Hall V8.3E 36VDC Brushless DC Motor Driver Non Inductive

Blue No Hall V8.3E 36VDC Brushless DC Motor Driver Non Inductive

Blue No Hall V8.3E 36VDC Brushless DC Motor Driver Non Inductive
Blue No Hall V8.3E 36VDC Brushless DC Motor Driver Non Inductive
Categories Brushless DC Motor Driver
Brand Name: JUYI
Model Number: JYQD-V8.3E
Certification: CE,
Place of Origin: China
MOQ: 1 set
Price: Negotiable
Payment Terms: T/T,L/C,Paypal
Supply Ability: 10000sets/Month
Delivery Time: 5-10 days
Packaging Details: PE bag+ carton
Product Name: Brushless Dc Motor Driver Board
Working Voltage: 12V-36VDC
Max current: 15A
Working Current: 15A
PWM Speed Control: PWM frequency:1-20KHz,Duty cycle 0-100%
Analog voltage speed regulation: 0-5v
Brushless: for sensorless brushless dc motor
Technical Support: Yes
Color: Blue
Speed pulse signal output: Yes
Contact Now
Company Info.
Changzhou Junqi International Trade Co.,Ltd
Verified Supplier
View Contact Details
Product List
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
Submit Buying Request
  • Product Details
  • Company Profile

Blue No Hall V8.3E 36VDC Brushless DC Motor Driver Non Inductive

JYQD_V8.3E No Hall motor, Non-inductive motor control Driver board, Speed ​​control board ,Reversing board

JYQD-V8.3E brushless DC motor driver board

Model numberJYQD-V8.3E
Operating temp.-20—85℃
Operating voltage12V-36V
Max current15A
Cont.working current15A
· PWM speed controlPWM frequency:1-20KHZ; Duty cycle 0-100%
Analog voltage speed regulation0-5V
O.V / L.V protectionYES
Speed pulse signal outputYES

Wiring Diagram:


5V -----Driver board internal output voltage

M ---- Motor speed pulse signal output port, 5V pulse signal.

1. Control port

Z/F---- Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.

VR ----Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%

GND—Used for Drive board internal control


2. Power port

MA ----motor phase A

MB ---- motor phase B

MC---- motor phase C

GND----DC-

VCC----DC +

3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.


4.Control port distance: 2.54mm,Power port distance:3.96 mm

5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.

Dimensional Drawing:


Precautions
♦When using this motor drive module to adjust the speed, the motor will have excessive current at high speed, the speed will be unstable, and the efficiency will be reduced.
When using this motor drive module to adjust the speed, the motor reverses at the start, the current is large, and the motor starts to shake.
The above situation proves that the matching degree between the motor and the drive module is low. Please ask the customer service to adjust the data. You can replace the hardware resistor and capacitor to achieve the best driving effect.
♦ If you use less than 60W, you don't need to add heat sink. If you use more than 60W, you must add heat sink without heat dissipation.
The driving efficiency of the chip is reduced. If the temperature is too high, it will cause permanent damage! The area of ​​the heat sink depends on the working environment (recommended heat dissipation surface area is more than 200 square centimeters)! When installing the heat sink, be sure to pay attention to the insulation problem. If it is not insulated, it will cause The drive board is permanently damaged!
♦ The power supply can't be reversed, and the reverse will be broken immediately! Therefore, it is necessary to make sure that the polarity of the power supply is not connected before wiring.
Xi
♦ The phase lines of the three motors can be connected freely. If the direction is reversed, you can reverse the two phase lines.
♦ 5V on the driver board is only used for external potentiometer speed control. Do not connect other power equipment, otherwise it will be damaged.
♦ This drive board is connected to the speed potentiometer 1-30K, it is recommended to use 10K potentiometer

We can supply extra assy as connector wires and heatsink.


Product Tags:

V8.3E Brushless DC Motor Driver

  

V8.3E bldc driver board

  

36VDC Brushless DC Motor Driver

  
Quality Blue No Hall V8.3E 36VDC Brushless DC Motor Driver Non Inductive for sale

Blue No Hall V8.3E 36VDC Brushless DC Motor Driver Non Inductive

Send your message to this supplier
 
*From:
*To: Changzhou Junqi International Trade Co.,Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like
Find Similar Products By Category:
LED Encapsulation Series
Hot Searches:
Inquiry Cart 0