3.2v Lithium Iron Phosphate Prismatic Cells 75ah Fast Charging High Cycle Life

Lithium Iron Phosphate 3.2V 60Ah 55Ah 75Ah LiFePO4 Prismatic Pouch Battery Cell

Notice:

Although the LiFePO4 cells and batteries are safe technology without risk of fire or explosion, they are like all Lithium batteries considered as Dangerous Goods due to high amount of stored energy. Release of this energy may cause dangerous situation.

Therefore high capacity cells and batteries cannot be transported as ordinary goods. Dangerous goods requires special handling care. Lithium cells and batteries are classified as ADR goods – special road transit.

Pictures

Other products

We focus on lithium batteries from 3.2V-12V-24V-48V-72V-96V-144V

Lithium Iron Phosphate (LFP or LiFePO4) :
Lithium Iron Phosphate - LFP - LiFePO4-cell
Lithium Ferro Phosphate technology (also known as LFP or LiFePO4), which appeared in 1996, is replacing other battery technologies because of its technical advantages and very high level of safety.

Due to its high power density, this technology is used in medium-power traction applications (robotics, AGV, E-mobility, last mile delivery, etc.) or heavy-duty traction applications (marine traction, industrial vehicles, etc.)

The long service life of the LFP and the possibility of deep cycling make it possible to use LiFePO4 in energy storage applications (stand-alone applications, Off-Grid systems, self-consumption with battery) or stationary storage in general.

Major advantages of Lithium Iron Phosphate:

Very safe and secure technology (No Thermal Runaway)
Very low toxicity for environment (use of iron, graphite and phosphate)
Calendar life > 10 ans
Cycle life : from 2000 to several thousand (see chart below)
Operational temperature range :up to 70°C
Very low internal resistance. Stability or even decline over the cycles.
Constant power throughout the discharge range
Ease of recycling

Life-cycle ofLithium Iron Phosphate technology (LiFePO4)
Lithium Iron Phosphate technology is that which allows the greatest number of charge / discharge cycles. That is why this technology is mainly adopted in stationary energy storage systems (self-consumption, Off-Grid, UPS, etc.) for applications requiring long life.

The actual number of cycles that can be performed depends on several factors:

Level of power in C-Rate
Depth of Discharge (DOD)
Operational environment : temperature, humidity, etc.