Hydraulic Automatic Cutting To Length Machine For 0.5-1.5mm Galvanized Steel

Hydraulic Automatic Cutting To Length Machine For 0.5-1.5mm Galvanized Steel

• Material of processible coiled plate: Galvanized steel, Carbon steel and others G550MPA
• Thickness of coiled plate: 0.5-1.5mm;
• Width of coiled plate: 1500mm;
• line speed: 0-30m/min ;
• Loading capacity:5T;
• Coil I.D: ф480-510mm;
• Coil O.D: ≤ф1400mm;
• diameter of leveling rollers: ф60
• the distance between leveling rollers: 65mm
• material of leveling rollers:42CrMo, hardness:HRC52-60
• Power: 220V three-phase electricity 60Hz;
• tolerance of diagonal error:≤±2mm/2000mm
• tolerance of length error: ≤±2mm/2000mm

Machine lists

Details of Each Composition

• Mechanical electrical de-coiler

Structure: four connection rods adjust manually and mechanically and the motor drives the steel coils doing uncoiling. Specification: 508×1250(width of roller)

• Leveler

◆It is composed of 17 working roller, driving device, 2 pinch code rollers and machine frame.

◆the function of supporting roller: make the even rollers receive the balanced force and reduce the friction of the leveling rollers

◆Drive model: all the independent rollers and gear box are driven by 30kw frequency conversion

• 1x1500 cutting machine

◆shear model: cut from up to down hydraulically.

◆Cooperate with the signal direct from the feeder

and shear automatically

◆Adopt gap adjusting design to cut the materials and can shear 1mm steel plate safely .

• Receible table

◆It is welded by steel(6m)

• Hydraulic Control System

◆Ensure the using of hydraulic parts

◆The working pressure of the hydraulic system is 6.3-16Mpa

◆Hydraulic tank capacity is 100 liters

• Electrical control system

PLC control mode, It is controlled by LCD screen.

IV. The foundation engineering of the equipment

◆The seller will provide the buyer the foundation plan of the equipment in 30 days after signing contract.

◆The construction and monitoring of all the foundation engineering of the equipment are in the control of the buyer.

◆The foundation holes are reserved holes, to match the foot holes of equipment.

◆After the equipment has been installed, the buyer is responsible for the foundation hole irrigation mud.

Machine photos

The main products of factory is light gauge framing machine, pre-painted steel forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down Pipe forming machine, The whole carriage plate for car beam unit , Steel storage unit, etc. Totally it has 100 types in 20 serious. The products are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas, residential, greenhouse and other construction projects. Our factory can meet the construction enterprises, automobile industry, iron and steel production enterprises’s growing demand.