8 channel Dvr 1080p Mobile Digital Video Recorder , Bus Dvr SIM Card

8 channel Dvr 1080p Mobile Digital Video Recorder,Bus Dvr SIM Card

• VM-7008-1080P Series

  8 CH HDD MDVR(1080P AHD, 8+1) ★ 8 x 1080P AHD + 1 x 1080P IPC; ★ G-Sensor included; GPS, 3G / 4G, internal Wi-Fi(5.8Ghz ) optional; ★ Supports 1*SD card(max 512G) + 2 * 2.5" HDD(max 4TB/disk); ★ Supports 2 * SIM cards; ★ Compression Format: H.265 ★ Facial Recognition feature supported(optional);

  Video & Audio Inputs	4 Channels AHD + 1 channel IPC
  Resolution	4 x 1080P AHD + 1 x 1080P IPC
  Storage	Supports 1*SD card(max 512G) + 2 * 2.5" HDD(max 4TB/disk);
  Alarm Inputs	8 Channels
  Alarm Outputs	2 Channels
  RS485 Interface	×1
  RS232 Interface	×2
  USB2.0 Interface	×1
  Built-in Module	G-Sensor, GPS, 3G/4G, WIFI ( 5.8 Ghz)

• FAQ:

• Why devices don’t record when they start?

• 1. Please check whether the SD card interface of the front version of the device has an SDcard.

• 2. If the SD card exists, check the status of the storage disk in the system informationinterface:

• Status classification: non-existent, unformatted, normal capacity is not full, capacity isnormal, the disk is full

• Status description:

• a. Does not exist, the device does not detect the SD card, please check the SD card on thecomputer, or replace the SD card, replace the device to detect whether it is an SD cardproblem or a device problem

• b. Unformatted, please format the device in the device formatting interface. After theformat is completed, check whether the SD card capacity can be displayed normally.

• c. The capacity of the normal disk is not full, please check the recording mode setting tdetermine whether the recording conditions are met.

• d. The capacity of the normal disk is full, please check if the video overlay switch is turnedon.

• Why devices on vehicles often restart ?

• 1. Frequent restarts: the device repeatedly goes offline; the video is intermittent, notcontinuous

• 2. Causes frequent restarts:

• a. The vehicle is not powered stably. Please measure the input voltage of the device whenthere is a problem with the device. The probability that the device will restartfrequently due to this situation is more common in practical applications.

• b. The storage disk has failed. Format the storage disk or replace the storage disk whileretaining the data.

• c. Device software or hardware problem, please remove the storage device hard disk or Scard, if the device is powered normally, the device still restarts. Please inform thetechnical support personnel of the software version number and return to the factoryif necessary.

• Why GPS location information can’t be seen in device?

• 1. Check if the status of the module on the device is present

• 2. Check if the GPS antenna is connected properly. The antenna should be placed in a wideand unobstructed place to have a signal. If the vehicle passes through the tunnel during thedriving process or if there is a tall building or a large tree, the signal will not be received. Thisis normal. Phenomenon

• Why we can’t see vehicle location while device is online?

• 1. Please check the set GPS upload interval on the platform

• 2. The GPS signal on the device can receive normal positioning information for the platform, so please check whether the GPS signal on the device is displayed normally.

• Why 3G dial not successfully?

• 1. View module status, dialing parameter settings

• 2. Check if the antenna is connected, 3G signal strength

• 3. Check the status of the SIM card, whether the SIM card has the Internet access function, ifyou need to make a call, you need to activate the voice function; and the chargingsituation, there is no arrears

• Why can’t connect back end server but device runs normally?

• 1. The 3G connection to the platform server must be successfully dialed by 3G. Pleaseconfirm that the 3G module has successfully dialed.

• 2. Check whether the server IP and port set on the device are correct, and report the ID forconflict.

• 3. Is the back end server running normally, is there any other vehicle online?

• The calculation method of the video file size:

  1 hour 1 image quality D1 resolution route file size: 3600 * 2048Kbps / 8 / 1024 = 900M

  720P=1.32GB/Hour/Channel

  1080P=2.25GB/Hour/Channel

  Flow calculation:Bit rate X3600/8/1024=MB

  384X3600/8/1024=168.75MB all the way one hour

• 
• 
• 

Company Information

Visionmaster Industrial Co., Ltd. is a leading Vehicle surveillance, Telematics & Video processing services provider with global perspective. We have dedicated to this industry for more than 10 years, and become a top mobile surveillance solution provider in China with a cutting edge team of more than 200 employees, among which there are more than 60 development engineers and 6 producing lines. Each product from material to export will pass 5-9 times striecttest work. With our rich experience and considerate service, Visionmaster can work on OEM/ODM project. With an annual production capacity of 200,000 pieces, we can meet your bulk order with easy.

Our solutions have been deployed worldwide among various applications including public transportation, school bus, private fleet, logistics management, railway and metro, mobile media operation, etc.

We have only been able to thrive for so long by looking after our customers and continual development. We are committed to providing our customers with an exceptional level of service and a wider range of products.

Quality, availability, affordable value and high levels of service are at the core of everything we do.