UK Internal Primer Hdf Wooden Moulded Doors Hollow Core No Shrink No Split

UK Internal Primer Hdf Molded Door Panels Hollow Core No Shrink No Split

Molded Door Panels Introduction

1). Each section panel's joint is adopt "Finger-protection"(Pinch-resistant) safety Design in order to avoid any finger injury when door open and close. The panel is injected with polyurethane foam(CFC FREE). Foam density is 40kg/m3 All the panels are produced by continued production line which provide the stable quality.

2). Special design of pinch-resistant, there is continued folding part along the panel,thus the panel can be cut at any size,the hinges can be installed accurately and firmly.

3). Wood-grain or stucco Texture surface increases intensity and gives better appearance

4). Thickness of the panel:40mm with the 0.326mm,0.40mm and 0.45mm

5). Max.width of the panel:11800mm

6). Section height: any size between 44-55cm

7) .40mm panel heat consumption factor:K=1.0W/m2k Heat consumption factor of the installed door:K=1.6W/m2k

8). standard and special colors for the selection

Molded Door Panels Application